Skip to Main Content

How to Put On & Fit Ski Boots - Ski Boot Fitting Guide

Whether you've just received your new ski boots in the mail, are heading to your local shop to check some out some options, or you’re at the hill ready to ride you’re going to need to know how to get your ski boots on and to make sure they fit. Here we’re going to cover how to put on ski boots and how to try on ski boots to make sure they fit. If you’re looking for more information about picking a pair of boots, check out our guide to choosing the right ski boots. With that said, however, we always encourage you to explore a professional assessment/fitting to get the best blend of both performance AND comfort.


What Socks to Wear

We recommend wearing a single pair of thin ski socks. One pair is enough, really. Multiple socks or too thick a sock puts pressure on the tops of your feet, reducing circulation and resulting in cold and numb feet. Thick socks also give you less control over your skis – top racers often ski only in nylons or no socks at all! Choose socks made of wool or a wicking synthetic material, and avoid cotton socks - cotton absorbs sweat but keeps it close to your skin rather than moving it away. For more information, read our guide on ski socks.


How to Put on Ski Boots

  1. Unbuckle the boot completely. Undo all buckles, including the power strap, and make sure none of the buckles are catching. You may be able to rotate the buckles slightly to avoid them from catching. If the ski boots are new, reach in the boot and be sure to remove any paper stuffed in the toe of the liner, then sit with the boots in front of you.
  2. Keep the boot flat on the ground and step into it as you stand up. Most boots have a loop on the tongue to help you pull it up and forward. Grab the tongue loop, point your toe straight into the boot, and in one deliberate motion pull the tongue up and out as you stand and step into the boot. With very stiff performance boots, it sometimes helps to grasp the medial (inside) cuff by the buckle straps with one hand and the tongue loop with the other and pull the two sides apart as you slide your foot in – this will spread the stiff plastic in the instep area and give you more room to slide your foot in.
  3. Center the tongue on top of your foot. Make sure the tongue of the boot liner is centered, and check that it’s positioned inside the of the liner. Don’t make an assessment about the fit yet, as the boot isn’t buckled and your foot isn’t settled.
  4. Don’t be alarmed if your boot feels tight. Your toes might brush the end of the boot or some areas might feel funny when you first put it on. At this point, your foot hasn’t warmed up the liner foam or started to push excess air out. Also, your foot isn’t in the “ski position” yet, because you haven’t buckled the boot.
  5. Buckle the top two buckles lightly. This will help to seat the tongue on the instep of the foot. Then, fasten the power strap.
  6. Flex the boot forward (hard). Flexing into the boot a few times with bottom buckles still unbuckled will help pull your toes away from the front of the boot and push your heel deep in the heel pocket.
  7. Fasten all the buckles snugly. You’re foot should not be moving around loosely, and the buckles should not be overly tight to the point where they’re hard to close or painful. Keep in mind that your boots, at this point, are the tightest they will ever be - they will loosen up as you and the boots warm up.

How to Fit Ski Boots & Ski Boot Shell Fit

To make sure you’re in the right size boot, do a “shell fit.”  Liners will compress with use and the overall fit will get looser, but the shell size won’t change.

  1. To do a shell fit, first remove the liner from the shell. Start with the boot completely unbuckled and on the floor with the toe facing away from you while you sit or kneel behind it. With your dominant hand firmly grab the top of the liner. With your other hand grab the top of the shell with your fingers between the shell and the liner. With one swift motion push the liner forward and away from you. Voilà! The liner is now out of the boot.

  2. Step into the shell and slide your foot forward until your toes just touch the front of the boot. Now check the space between your heel and the back of the shell. Most skiers should be able to fit 1 to 2 fingers in this space – this translates to roughly 15 to 30 millimeters. This is a general rule of thumb - high level racers and freeriders often prefer a tighter fit, with only about 10 millimeters of space or less. A shell fit that is larger than 2 fingers/30 millimeters will normally prove to be too loose once the liner compresses from skiing.

  3. Now center your foot side to side in the shell and see if you can fit a finger between the shell and both sides of your ankle. If your ankle bone is actually contacting the shell you may need to try a different boot, have a boot fitter modify the shell, or build you a footbed.

After determining that you’re in the right size shell, spend some time wearing the boots around your house. Standing in the boots and going through the motions of skiing while watching a movie is a good way to start the process of making the liner foam conform to your foot, as well as acclimating your feet to the feel of ski boots. If you’re new to skiing, remember that no ski boot will feel as comfortable as your street shoes, but stick with it – your street shoes won’t cut it for sliding down the mountain.

As you wear the boots, they’ll begin to conform to your feet. You can fine tune the fit in a number of ways using adjustments that most buckle systems have – twisting the wire bale of most buckles clockwise will shorten the length and increase the tightness slightly, so you can achieve a tension in between notches on the strap. If the cuff of the boot is too tight around your ankles or shins, most buckle ladders (the notched metal plates the buckles fit in) have two or three available positions. Some ladder tracks can be moved simply by twisting or unfastening a latch, others require a screwdriver or allen wrench. Rarely, you may have to drill a new hole in the plastic strap of the boot.

Many boots have a removable spoiler attached to the shell in between the liner and rear of the boot – if the boot hits you in the calf, you can try removing this piece, which is normally attached with Velcro or a screw.

One more thing - make sure your boots stay warm on the way to the mountain by keeping them in the passenger compartment of your car or using a heated boot bag - boots that travel in the trunk of your car start the day cold and are hard to put on when you get to the ski area.

Tired of Ski Boot Pain?

The evoFit program was designed to provide skiers with a high-quality custom boot fitting that balances comfort and performance for a wide variety of skier types. Learn more here, or visit any of our stores in Seattle, Portland, Denver, Salt Lake City, or Whistler for more details.  

Learn More With Our Other Ski Guides:

 
   
 

Discover Our Favorite Gear:

The Best Skis
The Best Women's Skis
The Best Beginner Skis
The Best All Mountain Skis
The Best Powder Skis
The Best Touring Skis
The Best Carving Skis
The Best Park Skis
The Best Intermediate Skis
The Best Freeride Skis
The Best Ski Bindings
The Best Touring Ski Bindings
The Best Men's Ski Boots
The Best Women's Ski Boots
The Best Touring Boots
The Best Ski Socks
The Best Beginner Ski Boots
The Best Value Skis
The Best Ski Poles
The Best Kids' Skis
The Best Kids' Ski Boots
The Best Cross Country Ski Boots
The Best Ski Boot Liners
The Best Gifts for Skiers

This is evo. We are a ski, snowboard, wake, skate, bike, surf, camp, and clothing online retailer with physical stores in SeattlePortlandDenver, Salt Lake City, Whistler, Snoqualmie Pass, and Hood River. Our goal is to provide you with great information to make both your purchase and upkeep easy.

evo also likes to travel to remote places across the globe in search of world-class powder turns, epic waves, or legendary mountain biking locations through evoTrip Adventure Travel Trips. Or, if you prefer to travel on your own, check out our ski & snowboard resort travel guides and mountain bike trail guides.

 

Still have questions? Please call our customer care team at 1.866.386.1590 during Customer Care Hours. They can help you find the right setup to fit your needs.