CamRock 2-4-2 – Rocker in the tip and tail, camber underfoot.

Flex: 5 – (1 Soft - 5 Stiff)

Underbite – Underbite edges re-distribute a rider's weight in a way that enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

PowerDrive 2.0 – This core begins with the same Poplar and Bamboo core found on the Standard and TDF. Yes. then mills two custom programmed channels about 30mm in from the edge, running parallel to the sidecut. Pre-bent bamboo stringers wrapped in carbon are inserted into these channels. The end result is a highly responsive core that precisely matches and compliments the outline of each board. From intuitive initiation, solid edge hold, and explosive release, the PowerDrive core is constantly active.

Triax Glass

Sintered True – Pellets or course powder are pressed until they form a solid. There are several suppliers in the industry and each have different codes depending on their color and transparency. These codes can make it seem like you're getting many different kinds of sintered bases, but they're all pretty much the same. The Sintered True base is harder and more expensive than an extruded base and can be faster for those that ride aggressively. But to do that, it needs to be waxed and prepared for local conditions.

2 x 4 Insert Pack