MTNPop Rocker 2.0 – Rocker between the feet and positive camber in the nose and tail. Rome fine-tunes the amount of rocker between the feet to just make contact with the snow when the rider is not standing on the board. The result is more than enough float and playfulness from the rocker, while still allowing the positive camber in the nose and tail to deliver responsive power. Great for riders who like the best of both worlds--responsive tuning, solid landing, powder floating, and nimble control.

Response Rating – 7 (1 Soft - 10 Stiff)

True Twin – A true twin snowboard shape is ideal for riders who want to ride switch and do some tricks. The nose and tail are identical and the flex is evenly distributed throughout the entirety of the board. True twins are perfectly symmetrical.

QuickRip Sidecut Technology – Teamed up with Rome's rocker boards, the goal with QuickRip Sidecut is to create a board that does two things: it needs to be nimble and maneuverable at slow speeds, and it also needs to be powerful and precise at high speeds. Rome achieves this by integrating two off-set sidecuts that create one zone in the nose, one between the feet and one in the tail. Where the center section meets the other two sections, Rome has created Mid-Board Contact Points. These Mid-Board Contact Points serve as the end of the running length at slow speeds, giving the board fine-tuned control. They also serve as edge "bumps" that grip the snow and increase precise power at high speeds.

Pop Core Matrix – Do-anything performance that balances lightness, response and strength with two zones of low-density wood. The everyday balance of response and lightness, this go-to design is built primarily of responsive, strong wood, with two zones of a lighter wood species.

StraightBiax Carbon Laminate – This laminate takes the freestyle-oriented flex of 90-degree biaxial fibers and adds in longitudinal carbon strips that increases ollie power without any unwanted overall stiffness.

HotRods | Bamboo Single Barrel – A single rod of bamboo in the centerline adds ollie pop while letting the rest of the board flex normally. Rome mill channels in the cores of nearly every board we make and integrate thin carbon, glass and bamboo rods for more pop and more power. As with TurboRod Technology, we place HotRods in the boards to deliver power to specific areas. Found in both TurboRod and HotRod Technologies, a single barrel of carbon, glass or bamboo delivers more pop in the centerline of the board without any unwanted torsional power to increase freeride edge hold.

SinterTrue Base – Fundamental sintered performance with plenty of wax absorption