Alpine V1 Profile – The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Directional Flex

Flex Rating – 5.5 (1 Soft - 10 Stiff)

Directional Shape

Parabolic Sidecut – A PARABOLIC sidecut consists of a mirror-symmetrical curve. In snowboard terms, this design creates a board with a deeper sidecut and a quicker turning point in the center compared to radial arcs.

FSC Certified P2 Superlight Core™ – The P2 SUPERLIGHT CORE™ is an extremely lightweight core engineered to withstand high impact and deliver maximum pop. Comprised of an even mix of Poplar and Paulownia wood, the P2 is FSC® Certified and ready to dominate in any environment.

Carbon Fiber Beams – Increases power and response while remaining ultralight.

Special Blend Fiberglass – This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Inlaid Cork Dampers – Reduces chatter on the nose to help you blast through pow and choppy snow at high speed with increased confidence

Full ABS1000 Sidewalls

Powerdrive™ Base – Dynamic and durable, easy to maintain and reliable, this base material is electric through the trees and fast over the flats. Exclusively formulated for the wide chassis of the Spring Break powder division these bases were made with the powder lifestyle in mind.

360˚ HRC48 Steel Edges

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

PAM16000™ Topsheet with Metallic Underlay

Multitech™ Level 4 DeepSpace™ Silkscreen – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Die-cut Base Graphic

Stainless Steel 2 x 4 Inserts