55% Polyester / 45% Recycled Polyester

O'Neill Hyperdry – 10K Waterproofing / 10K Breathability

Fellex® Repreve® Synthetic Insulation – 100g Body / 80g Sleeves & Hood

Relaxed Fit

Grow System – Simply unpick the inner stitches on the arms and legs to extend the garment length and get several year's use out of it.

Articulation – Ergonomically curved seams for maximum freedom of movement. The seams are constructed at at a contoured angle to aid freedom of movement.

Lift Pass Pocket – Keep your lift pass safely in its (zippered) pocket. The pocket is always positioned on your left underarm to scan your lift pass with ease at the automatic access control gates.

Critically Taped Seams – In order to make an outerwear garment waterproof, you need more than waterproof fabrics - you also need taped seams. A simple seam becomes a taped seam once waterproof taping has been carefully and firmly placed over a stitched seam. Critically taped seams means that only the seams in critical, exposed areas are taped.

Cuff Adjusters – Adjustable cuff with extra elastic and velcro closure to adjust the cuff opening to a snug fit for stormy days or more open for the sunny and warmer days.

Fixed Hood – Keep the heat in and the snow out with the fixed hood. Ergonomically shaped hood with build in visor for maximum storm coverage.

Fixed Snow Gaitor – The barrier between the snow and your body when you take a tumble. This piece of fabric is found at the bottom hem inside the jacket with press buttons to seal it and stop snow getting in.

Storm Placket – Covers the zipper to keep moisture and the cold air out. A protective flap of fabric which sits in front of the jacket over the zip to stop cold winds getting into your jacket.

Wrist Gaiters with Thumbholes – Keep the snow out of your sleeves and your wrists. The wrist gaiter with thumbhole keep palms warmer too.