Camber – Tried and true, camber has been the dominant board bend in the snowboard industry for almost 40 years. Cambered snowboards deliver precise turning and edge control, with spring-loaded pop providing better jumping characteristics.

Personality – 4 - 7 (1 Soft - 10 Stiff)

Twin Flex – The flex is perfectly symmetrical from tip to tail for a balanced ride that's equally versatile regular or switch.

Directional – The classic snowboard shape, designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while still giving you plenty of float, flow, and control to rip any terrain or condition.

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

Squeezebox – Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Frostbite Edges – Frostbite edges extend out slightly from the sidewall of the board for added bite when you need it and a smooth and buttery ride when you don't.

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

The Channel® Mounting System – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 30% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a medium‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Kickback Hammock – A lighter weight upgrade to the heel hammock, this two-piece heel hugging hiback is literally suspension in a hiback. Dynamic interaction between an internal spring and rubber over molded hammock results in increased response and reduced vibration while your heel is cradled in complete suspension.

30% Short-Glass / Nylon Composite – A high‑performance blend featuring ramped up strength in a medium‑flexing package.

Compatibility – Must Be Used with Burton Step On™ Boots

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Medium Flex: 5-8 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

Total Comfort Construction – Get an instantly broken-in feel right out of the box. Total Comfort's industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to day 100.

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

Dual Zone Boa® System with New Sequence™ and Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, warrantied for life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

The Step On® System – A clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.

Compatibility – Must Be Used with Step On™ Bindings