Directional Camber – Directional Camber Bend has camber under both feet for stability through deep-diving turns and variable conditions and a rockered nose that adds lift for increased float

Directional Flex – Directional Flex features increased pop in the tail and a more resilient nose that allows riders to easily maintain control through all terrain and conditions

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

8mm Taper – Easy turning, providing the feel and focus of a directional board without anything holding you back from riding it like a twin

All Mountain Directional Shape – Designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while providing plenty of float, flow, and control to rip any terrain or condition

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Artist: Sophie Sellstrom / Dylan West

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

The Channel® – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

Flex Rating – 6 - 9 (1 Soft - 10 Stiff)

Single Component 30% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a medium‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

EST® Binding System – By removing the materials from beneath your feet and replacing them with cushioning, Burton is able to drastically reduce weight and explore entirely new designs. With EST®, the possibilities for flex is infinite, and so are the stance options.

SensoryBED Cushioning System™ – Dual-density EVA automatically settles your boot into a natural position regardless of stance, width or angles for improved comfort, reduced fatigue, and more direct board control.

DialFLAD™ – With Living Hinge features a rotating dial for making adjustments to the forward lean angle of the hi-back based on the preference of the user, getting an active and quicker response with more forward lean and a more relaxed response with less forward lean.

Kickback Hammock – A lighter weight upgrade to the heel hammock, this two-piece heel hugging hiback is literally suspension in a hiback. Dynamic interaction between an internal spring and rubber over molded hammock results in increased response and reduced vibration while your heel is cradled in complete suspension.

Step On and Go – The Step On® system creates a clean, simple boot-to-binding interface that lets you step right on and offers hard-charging response.

Boot Compatibility – Must Be Used with Step On™ compatible boots.

Mounts Exclusively with Burton Boards Featuring The Channel™

Medium Flex: 5-8 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

Women's Specific True Fit™ Design – Enjoy a more harmonious connection with Burton's True Fit™. True Fit means that every element -- from boot liners to lace guides, baseplate to strap designs, board shapes to flex profiles -- has been designed and engineered for the way women ride. Because when it fits right, it rides better.

Total Comfort Construction – Get an instantly broken-in feel right out of the box. Total Comfort's industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to day 100.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Dual Zone Boa® System with New Sequence™ and Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, warrantied for life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

The Step On® System – A clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.

Compatibility – Must Be Used with Burton Step On™ Bindings