Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Touring Brackets – Incorporates the best features of aluminum and thermoplastics. Spark R&D overmolds their custom plastic blend over and through the holes in the aluminum base, forming bushings that are incredibly durable.

Snap Ramps – Bindings slide sideways into offset touring brackets and are locked into place with our snap ramps.

ST Whammy Bars – A single fatty wire with a side arm lever. Overmolded thermoplastic sections allow you to switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Includes an overmolded sleeve of plastic on both sides of the bar, right where the climbing wire contacts the baseplate. This reduces friction allowing for super smooth movement into and out of high, low, and stowed positions.

ST Whammy Bar Climbing Wire – Built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire deployment and transitions.

T1 Heel Rest – Catches the climbing wire in the 12° and 18° positions.

CNC Machined Baseplates – Solid for maximum stiffness and durability.

Surge Pebax Pillow Line Straps – Pebax is a premium material most often found in high-end ski boots as it provides consistent stiffness and improved toughness in cold temperatures. It’s also 20% lighter than our standard material.

Premium Materials & Custom Hardware – Custom made hardware allows splitboard specific features to be added like hex heads for less strippage and hollow pivot pins for weight savings. The heel loop screws got the best makeover of all with a custom screw head with double the drive depth and an unthreaded shoulder to improve connection to the heel loop.

7075 Aluminum Heel Loops – Thinner and lighter than the standard heel loop while maintaining the required strength.

Surge Carbon Reinforced Nylon Highbacks – More responsive, lighter, and stiffer than our standard glass reinforced highbacks. Injection molding allows for more complex geometry and improved impact strength compared to other methods of carbon fiber construction

Requires Pucks for Mounting in Ride Mode – Spark Canted Pucks or Regular Pucks recommended (available to purchase separately)

Ibex Crampons sold separately

Weight – 1.34 lb/ea / 2.68 lb/pair (Size Medium)

Aluminum Discs with Nylon Bases

Discs – Aluminum

Nylon Bases

3˚ Canting (Inward Angle) – A favorite among hardbooters. Your knees will thank you.

Aluminum Discs – Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity.

Adjustability – +/- quarter inch (6.5mm) of toe/heel adjustment allows for perfect centering. An industry first! +/- 30 degree angle adjustments; infinite stance width and setback adjustments.

Superior Materials – Bindings slide on soft nylon for effortless installation.

Weight – 319 grams

Compatible with All Spark R&D and Other Brands' Puck Compatible Splitboard Bindings (Except K2 Kwicker)

Not Compatible with Regular Spark Puck Screws

Not Compatible with DIY Splitboards, Unless the Voile Factory Hole Pattern Was Used

Not Compatible with Channel Style Boards from Voile, Burton, and K2