System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.

Flex Rating – 7 (1 Soft - 10 Stiff)

3° Uprise Fenders – Arbor’s Fenders are lifted side sections at the tip/tail of the board that create smoother performance without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Taper – 8 mm

Grip-Tech – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Highland Split Core – The highly versatile Highland Core, constructed with a 1:2 blend of poplar and paulownia, with additional insert and centerline components for a premium factory splitboard.

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Recycled ABS – When a plastic alternative is unavailable, as in the case of ABS sidewalls, Arbor does its best to opt for a recycled material to improve the sustainability of its products.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Aromatic Cedar Powerply – FSC Certified, sustainably harvested, resilient and aromatic, with tones of cream, yellow, dark red, and violet.

R.A.P. Topless Technology – A build process in which Arbor eliminates the need for their Bio-Plastic Topsheet, creating a lighter, more eco-friendly ride.

Bio Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

Karakoram UltraClip – Karakoram’s premium splitboard clip is powerful, easier to use, and lighter. Once joined, the UltraClip fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. The lever locks in the touring position as well to eliminate unwanted movement on the ascent.

Sustainable Wood Materials

Leaving It Better

Universal Splitboard Insert Packs

Smooth Touring Pivot – Independent sleeves rotate freely on a fixed thru-axle, similar to a bike axle, making these stiff and smooth. They're wide for touring rigidity, they shed snow well, and the quick-releasing bracket allows for simple transitions.

Active Joining – No slop with instant response. Pre-loaded contact points create an ultra solid connection between your bindings and splitboard.

Interlocking Seam Tabs – No separation: tabs interlock across the seam of your board, interlocking and pre-loading the two halves for a solid ride.

Dual Surf Sidewalls – Freedom of movement tip to tail. Tuck your knee and tweak your grabs.

Flex (1 Soft - 10 Stiff) – 4

Surf Airpod Ankle Straps – Independent Pressure Pods combine with comfy material to make these Karakoram's most surfy straps.

Airform Straps – Independent Pressure Pods articulate to boot eliminating pressure points and pinch points.

Aluminum Ratchets

Airflow Highback – A comfortable and supportive medium flex highback.

Flex (1 Soft - 10 Stiff) – 6

Compatible with Standard Splitboard Inserts

Includes – Bindings, Connect Split Kit

Mohair / Nylon Blend – Kohla Austrian construction makes the lightest most durable plush, with the perfect balance of grip and glide.

Wire Rope Tip Clip – Easy install and removal from tip of board.

Universal Tail Clip – Fits to multiple splitboard tail configurations.

Easy Peel – Kohla Smart Glue Technology allows for optimal adhesion while being easy to separate.

Waterproof – Sealed with Kohla’s Patented PFC-free Vulcanized Rubber. Prevents water absorption. Keeps skins sticking to ski base in Spring conditions.