CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 7 (1 Soft - 10 Stiff)

MidBite – MidBite blends the response of a narrow waist width with the stability of a wider nose & tail.

Directional Volume Twin – As the lines between freeride and freestyle continue to erase, Yes. had to address the needs of those committed to riding twins but finding themselves in more pow. Symmetrical flex, centered stance, identical wide points of the board (therefore, NOT tapered), and identical shovel lengths but with a slightly lower volume tail.

Poplar / Paulownia / Bamboo – Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Triaxal Glass

Sintered True – True Sintered bases are harder and more expensive than extruded, and can be faster for those that ride aggressively.

2 x 4 Inserts

Additional Slamback Inserts

Flex Rating – 5 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 2.0 Nylon Reinforced with 30% Glass Fiber – This baseless design allows for uninterrupted board flex, with rigid I-Beam wall sections that transfer energy to the board's edges.

Post – Nylon with 50% Glass Fiber

Combo Disc – 4x4 & Channel compatible

Freewing Highback – Higher medial side follows leg angles. Pre-rotated 10° laterally. 15mm higher than original Flex Hinge highback. Lateral hook for added support. Dampens chatter and eliminates calf-bite.

SIEVA Ankle Straps – Single Injected EVA, the body of this strap is made with one-part EVA injection, eliminating any stitching and reducing gluing to less than 1% of the strap area. A nylon webbing that is strong, durable, and flexible is inserted in the body of the strap at one end and sealed by a micro-injected logo.

3D Contour Toe Straps – If it's grip you're after, look no further. This strap is not only super grippy, but it is also moldable and can be used either on the tip or top of your boot.

Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

NOW Tool-less Adjuster Straps

PA66-GF Buckle Levers – Made with the same high grade nylon and glass fiber blend found in posts and discs. This material is light and strong.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Highcup Compatibility – Compatible with all hangers. Low profile for extra flexibility. Street, park and pow.

Bushings – Available in Soft (40 Shore)