Camber – Tried and true, camber has been the dominant board bend in the snowboard industry for almost 40 years. Cambered snowboards deliver precise turning and edge control, with spring-loaded pop providing better jumping characteristics.

Personality – 5 - 8 (1 Soft - 10 Stiff)

Twin – Perfectly symmetrical for a balanced ride that's equally versatile regular or switch. Jib, spin, stomp, and butter with a greater balance of freestyle mobility and cat-like stability no matter which way you point it.

Pro-Tip – A tapered tip and tail thickness reduces swing weight for easier mobility.

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.

Off-Axis Squeezebox – Matches the angles of a typical park rider’s stance by having a defined heel edge on the board no matter which foot you ride forward. (optimized for 15, -15, but you can ride just about anything). This gives better toe and heel edge grip, natural flex around the bindings, smoother feel on take-offs and landings, and more natural heel side turns.

Women's Specific Triax™ Fiberglass – Torsionally softer than Burton's regular Triax™ for lighter women's bodies

Sintered Base – Durable and highly porous, get added durability and superior wax absorption for greater overall glide.

Off-Axis Frostbite Edges – Frostbite edges extend out slightly from the sidewall of the board for added bite when you need it and a smooth and buttery ride when you don't. Adding Off-axis profiling to the edge contours enhances the ride for typical park angles.

Artist – Jeremy Geddes (https://www.jeremygeddesart.com/)

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

The Channel® Mounting System – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

EST® Binding System – By removing the materials from beneath your feet and replacing them with cushioning, Burton is able to drastically reduce weight and explore entirely new designs. With EST®, the possibilities for flex is infinite, and so are the stance options.

Single Component 30% Short-Glass / Nylon Composite Baseplate – More responsive yet playful. One material throughout creates consistent response and feel for all-terrain domination.

SensoryBED Cushioning System™ – Dual-density EVA automatically settles your boot into a natural position regardless of stance, width or angles for improved comfort, reduced fatigue, and more direct board control.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Zero-Lean Canted Hi-Back Design – Your legs don't go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort. Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi‑backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Supergrip Capstrap™ – The Supergrip Capstrap™ delivers optimal fit and function with an ultra-minimalist, glueless, stitchless, and PU-free injection molded strap component that works both as a capstrap™ or over the toe. Simple and super durable.

Flex Slider – Makes strapping-in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also incredibly strong.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Mounts Exclusively with Burton Boards Featuring The Channel™

Re-Ground Materials to Reduce Waste

Medium Flex: 4 - 7 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

1:1 Soft Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size liner gets a matching half and full size shell, tongue, and outsole for a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won’t be stuck with the slop of a mismatched shell and liner.

Articulating Cuff – Allowing the upper and lower zones of the boot to flex independently creates fluid forward motion, minimizes shell distortion, and maximizes heel hold and response.

GripLITE Backstay – Creates a snug interface between the boot and the highback. Made of rubber, the Backstay also shaves weight off the boot. The result is a more direct energy transfer from boot to binding to board for reduced rider fatigue.

Women's Specific True Fit™ Design – Enjoy a more harmonious connection with Burton's True Fit™. True Fit means that every element -- from boot liners to lace guides, baseplate to strap designs, board shapes to flex profiles -- has been designed and engineered for the way women ride. Because when it fits right, it rides better.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Plush Cuff 1.0 – The Plush Cuff 1.0 hugs your calf like no other thanks to a combination of medial and lateral neoprene stretch zones and a super soft fur lining.

Focus Cuff – Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle than the Lock-UP Cuff for increased response.

Aegis™ Antimicrobial Coating – Antimicrobial coating on the lining of the boot fabric keeps your boots from creating their own mini-ecosystem of stink by preventing the growth of odor-causing bacteria.

Lightweight Power Panels – To ensure a consistent flex from day 1 to 100, Burton Imprint™ and Life liners feature strategically placed Power Panels that, even after being deeply flexed, return to their original position.

Dual Zone Boa® System with Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, Warrantied for Life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner Coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

Boa® System – A highly dependable lacing system that can be adjusted at a moment's notice anytime, anywhere. The simple twist of the knob at the top of the boot strategically tightens in just the right places.

TX3 Lacing – The best of both worlds. TX3 is a flexible and low-friction textile lace used in high-power boots to provide a soft, modern design aesthetic with lasting durability and strength.

Level 2 Molded EVA Footbed – EVA Footbeds are lightweight, long-lasting, and absorb shock.

DynoBITE EST® Outsole with ReBounce Cushioning – Strategically placed rubber patches give extra traction and durability at the forefoot and heel. Like every Burton Dyno outsole, you're provided lightweight, durable cushioning that's formulated specifically for snowboarding. 10-15% recycled rubber content depending on model treads lighter on the planet, too.

ReBounce Cushioning – This Burton‑exclusive brings cushioning closer to your foot than ever before by placing it within the shell of the boot for an added layer of impact protection that sits directly below your foot. Added warmth and consistent performance in cold temperatures is achieved by wrapping it in a heat‑reflective material that keeps the cushioning soft and effective.

Sleeping Bag Reflective Foil – This low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.