CamRock – The response of camber with the floatability of rocker. Camber between your feet acts as a spring, keeping your contact points on the ground as you go in and out of turns and allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more, allowing it to float.

Flex Rating – 8 (1 Soft - 10 Stiff)

Tapered UnderBite – More floatation and total edge control. Each side of the board's effective edge is segmented into 3 distinct parts that step horizontally inward rather than tapering. The board will blend into turns effortlessly and have the directional drive and float you'd expect from a tapered board.

Directional

Surge Core – "Surge core" core features 50% Poplar and 50% Paulownia 20 mm strips with 2 center bamboo struts, perfect for large tips and tails. Poplar offers lightweight consistency and flex, while Paulownia provides strength with a favorable strength-to-weight ratio. Bamboo adds durability and responsiveness. This combination ensures optimal weight reduction, responsiveness, and performance.

Triax Fiber Construction – Offers great balance of torsional stiffness, durability, and energy transfer. This construction enhances edge hold and stability at speed while keeping the board responsive and lively underfoot.

Air V Carbon Reinforcement – True biaxial aerospacial carbon fiber stringers create a dynamic V-shape extending from the front insert pack to the board’s contact points. This V design enhances binding response, increases torsional stiffness, and ensures exceptional stability, particularly enhancing float in the nose. Carbon fiber’s remarkable strength-to-weight ratio guarantees responsive stiffness, improved control, pop, and energy transfer. Air V delivers superior performance and responsiveness in every turn.

Sintered Base – Crafted by fusing tiny polyethylene particles under heat and pressure, creating a porous, durable surface. Known for superior speed and wax absorption.

2 x 4 Inserts

Flex Rating – 8 - 9 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Carbon Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Post – Nylon with 30% Carbon Fiber

FRC Carbon Highback with 3K Carbon Fiber

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over the original. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA.

Pro-Grip Toe Strap – Non-slip and grip is what you have with the Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Nylon with Carbon Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Medium (45 shore), and Hard (55 shore) Bushings