Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 7 (1 Soft - 5 Stiff)

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

C/FX Basalt – A patented combination of fiberglass and basalt designed to provide an optimal ratio of weight, power, and dampening.

BA MD Fiberglass

30% Bio-Based Resin

ABC Wrapper – More dampening, less plastic ! ABC Wrapper is a process using wood veneers to reduce fiberglass in each board.

Recycled ABS Sidewalls – The molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

2 x 4 Insert Pattern

Response – 8 (1 Soft - 10 Stiff)

Toe Heel Stiffness – 8 (1 Soft - 10 Stiff)

Lateral Stiffness – 8 (1 Soft - 10 Stiff)

Asym Rockered Matic-Series

Heel Pedal – The heel pedal activates the automatic closing of the hiback and straps, and locks the engagement system. This mechanism is self-cleaning to avoid snow build-up, and there are three engagement clicks for increased security.

Release Lever – Push to unlock the engagement system and lift your boot up & out. The release lever is located on the medial side of the baseplate for maximum ergonomic effi ciency and protection from external triggers.

Heelcup Roller – The heelcup roller reduces friction and guides the heel of the boot down, for buttery-smooth entry and exit.

Slip-N-Grip Plate – Reduces friction with the outsole of your snowboard boot. Allows you to easily slide in and out, without compromising the underfoot comfort of 2.5° Bankbeds.

Nylon Multidisk – 4HP + 3HP + Channel

Asym Hadron-Hiback – Lightweight nylon hiback with asymmetrical contour to perfectly fit Nidecker's asymmetrical boot cuffs, especially at canted riding angles.

Reclining Highback – The Reclining Hiback creates the fastest automatic entry system. It fully folds down, creating a large opening to conveniently drop in your boot.

Hybrid ExoFrame PowerStrap – Designed to feel and work like a two-strap, the Hybrid strap’s ankle-toe connection keeps the straps in place for easy entry. It also transfers energy more efficiently and allows the straps to be ridden a bit less tight.

Hexo Toe Cap with Aux Tech – A 3D Hinged Auxetic pattern for unmatched formfitting the toebox of your boot.

Active Strap – As you recline the hiback, the footstrap gets actively lifted out of the way, so you can easily and conveniently get your boot in and out. The straps hug your boot with the tightness at which you first set them, each & every time you drop in.

Locking Strap Ratchets (LSR) – Locking Slap Ratchet buckles lock down to secure your preferred footstrap tightness. Either Set-it and Forget-it for the Automatic mode, or just use them like regular buckles for the two-strap experience.

Drop In Technology – This technology was developed to allow easy opening and closure in complete safety. Multiple notches allow the binding to lock shut from the first click; there are three in total, which allow closure even if obstructed by snow accumulation. Just in case you’re in steep or off-camber terrain...or waist deep powder.

2.5 Degree Canted Footbeds