Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 4 (1 Soft - 5 Stiff)

Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.

Radial Sidecut – Radial is the classic sidecut for consistent response forward and switch.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Ghost Basalt Stringers – Basalt stringers are sewn into a trail layer for durable pop, control, and damp ride at speed, and easy maneuverability when you're keeping it mellow.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Gunslinger Sidewalls – These sidewalls implement carbon inlays that run the full length of the board to meet the reaction and shock absorption needs of all riders.

Area 51 Base – Built to go faster and fly higher, the Area 51 base is a high-density sintered base laced with a super secret wax formula and a specially engineered factory finish designed for air time and durability.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

30% Bio-based Resin – High performance with low environmental impact, this bio-based resin is made with 30% of its molecular structure derived from plants.

Natural Wax

2 x 4 Insert Pattern

Feel Rating – 6 (1 Soft - 10 Stiff)

A-Series Aluminum Chassis – The A-Series Chassis provides the reactive flex and power transfer of aluminum underfoot. The A-Series Chassis was designed to allow the aluminum to flex under the rider’s weight allowing for a much more reactive ride.

A-Series Diecut Basepad

Canted Footbed

Plastic Discs

Slimeback™ Highback – These Highbacks utilize urethane similar to Ride's Slimewalls™ technology. The Slimeback™ material absorbs shock and damps vibrations to help smooth the ride while providing fluid support.

Reversible Ankle Strap – Designed to be worn in two positions: one for hard charging, performance and the other for a more relaxed feel that lets you really lean into your ride. Utilizes a strong upper and a soft flexible lower portion to support all of your riding needs.

Minimalist Toe Strap

Linkage Ratchet – Designed to improve ladder durability and eliminate ratchet wag, resulting in a smoother user experience with the same hold you expect.