Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex Rating – 8 (1 Soft - 10 Stiff)

Directional Flex Pattern

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

10mm Taper – The tapered shape sinks the tail in pow for better float and quicker turns.

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Fusion Core – The Fusion Core is Jones' lightest wood core yet. Core is made from mostly paulownia with specifically positioned pockets of poplar for improved durability and response.

Koroyd® Core – Award-winning engineered core developed from the aerospace industry. Koroyd is the lightest, most advanced damping core material Jones has ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Ultra Construction – The Ultra series is the redefinition of what it takes to build a snowboard. Jones Ultra boards combine innovative construction techniques with premium materials for revolutionary results.

Fusion Carbon – This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Carbon Stringers – Carbon stringers add torsional stiffness for improved response and increased pop. Carbon layer keeps flex profile dimensionally stable for a consistent ride for the lifetime of the board.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Ultra Base – Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding. They've also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

Recycled Edges

Ultralight ECO-Topsheet – Super damp, durable and lightweight topsheet material made from organic plant material.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

2 x 4 Insert Pattern

Personality / Flex: Stiff & Powerful – 5 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Response Tri-Foam Foot Pillow – Premium full length foam footbed made with three different densities of EVA foam. The heel and toe are soft for max comfort, the center is mid-stiff for precise response and the bottom of the footbed is stiff for solid support.

Carbon Reinforced Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit. Nylon reinforced with 30% Recycled Carbon Fiber.

Recycled Nylon Post

Flushcup Technology

Asym Flax/Carbon Wide-back – Designed for maximum reponse. Flax/Carbon composite highback with extended width upper section for improved toe-side turn response. Made from Flax and 3K Carbon fiber.

Asymmetrical Shape Follows Leg Angles

Extended Upper Wing for Improved Turn Response

Tool-Less Forward Lean Adjustment

Highback Flex – 9 (1 Soft - 10 Stiff)

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Hinge Connector Strap Attachment + Pre-Curved Ladders

Pre-Curved Ladders

Tool-Less Strap Adjustment

Asymmetrical Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Nylon, Recycled Carbon Post