CamRock – CamRock profile blends camber in between the bindings and rocker in the tip and tail. This profile enhances freestyle riding by being more playful while still having the pop, power, and response of camber.

Personality / Flex: 3 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Medium 3D Contour Base – 3D Contour Base tuned for all-terrain featuring 4mm spoon bevel in the nose and 0 to 4mm spoon bevel in the tail. Spoon bevel starts just before contact point.

Master Core – The Master Core is made of 1:1 Poplar to Paulownia ratio in alternating stringers to create a lightweight, poppy, and durable core.

BComp Carbon / Flax Stringers – BComp Carbon/Flax stringers offer the perfect performance balance as the carbon provides crazy pop and the flax sucks up chatter and reduces CO2 emissions compared to a full carbon stringer. Developed in collaboration with the Swiss engineering firm BComp.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Recycled Edges – Bombproof edges made to be the strongest and longest-lasting on the market.

High Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Premium Topsheet – Premium Topsheet is durable and perfect for daily use.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

2 x 4 Insert Pattern

Freeride / Freestyle Pack Inserts – Allows option to center or set back your stance on the sidecut as conditions demand.

Personality / Flex: Stiff & Lively – 4/5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Carbon Injected Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit.

Flushcup Technology

3˚ Canted Foot Pillow

Control Flex Highback – Designed for balanced response and flex. Mid-wide profile and mid-stiff flex let you lock in turns or tweak airs.

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Hinge Connector Strap Attachment + Pre-Curved Ladders

Tool-Less Strap Adjustment

Zytech Buckles

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Included Bushings – Hard - All Mountain / Freeride Mode (Surf Mode bushings available separately)

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel