Directional Camber/Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Personality / Flex: 3 – (1 = Soft and Playful, 5 = Stiff and Aggressive)

Forever Flex – Forever Flex is a new manufacturing process that helps stabilize the flex and rocker of a board for its lifetime.

Directional Flex Pattern

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Directional Shape

3D Contour Base 3.0 – Freeride focused 3D Contour Base featuring a 7mm of spoon bevel in the nose and 0 - 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Re-Up Tech Core – Groundbreaking wood core made out of responsibly harvested Paulownia and Poplar with specially positioned embedded stringers made from reclaimed snowboards.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved manouverability and stiffer through the tip and tail for stability and pop.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Oversized Recycled Edges – All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Sustainable Flax Top

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

2 x 4 Insert Pattern

Personality / Flex: Happy Medium – 3 / 5 (1 = Soft and Forgiving, 5 = Stiff and Lively)

Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit. Nylon reinforced with 30% fiberglass.

Flushcup Technology

Comfort Foam Foot Pillow – Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.

Nylon Post

Progressive Flex Highback – Designed for precise and playful response. Symmetric mid-wide profile and medium flex for carving, tweaking airs and riding switch.

Comfort Flex Ankle Straps – Comfort Flex Ankle Straps are 3D molded to evenly distribute pressure and eliminate strap bite plus asymmetric for customizable response. Flip-It Strap compatible (Freeride mode + Surf mode).

3D Flex Fit 2.5 Toe Straps – 3D Flex Fit 2.5 toe straps stretch for ultimate fit and comfort

Flip-It Ankle Strap Technology – Side 1: Freeride mode / Side 2: Surf mode

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Zytech Buckles

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Included Bushings – Soft - Surf Mode