Park V2 Profile – These versatile boards feature a dual reverse camber Flat Kick freestyle shape. A zero camber section throughout the insert area provides a stable skate-style feel, while elevated contact points turn on a dime and float effortlessly in powder.

Twin Flex

Flex Rating – 4 (1 Soft - 10 Stiff)

Radial Sidecut – A RADIAL sidecut is a single radius design that allows your board to start and finish a turn on the same arc.

Twin Shape

FSC Certified Dual Core™ – The FSC® CERTIFIED DUAL CORE™ was built to achieve the consistent, dependable feel required from riders looking to take their skills to the next level. This lightweight core has zero irregularities and a consistent, uniform flex, combining lightweight Poplar with Beech for increased power and durability.

Special Blend Fiberglass – This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Full ABS1000 Sidewalls

Superdrive™ Base – The SUPERDRIVE™ base material lives in the Sintruded category of boards that deliver benefits of both sintered and extruded bases. These bases take the characteristics and manufacturing techniques used in creating extruded base material, but due to higher pressure and temperature, increase the surface hardness to levels near most sintered bases. This expands the durability and surface strength, creating a base that will be more durable when jibbing and ripping around the mountain while retaining a low maintenance and carefree lifespan of the board.

Sublimation

360˚ HRC48 Steel Edges

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

Digital Print with Metallic Underlay

Bitter End Deflection Tuning

Stainless Steel 2 x 4 Inserts

Soft Flex – Softer snowboard bindings are more comfortable and forgiving.

Single-Component Lightweight, Bomb-Proof Polycarbonate Re:Flex™ – One material throughout the baseplate creates consistent response and feel for all-terrain domination.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Canted Hi-Back Design – Your legs don't go straight up, and neither should your high backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort.

MicroFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Reactstrap™ – Minimized construction that houses a 3D® curved triple axis spine with an ultra-responsive wrap that conforms to any boot.

Supergrip Capstrap™ – The Supergrip Capstrap™ delivers optimal fit and function with an ultra-minimalist, glueless, stitchless, and PU-free injection molded strap component that works both as a capstrap™ or over the toe. Simple and super durable.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Women's Specific True Fit™ Design – Enjoy a more harmonious connection with Burton's True Fit™ women's boards, boots and bindings. True fit means that every element of every piece of your setup - from boot liners to shell tongues, baseplate to strap designs, board shapes to flex profiles - has been designed and engineered around women and for the way they ride, because when if fits right, it rides better.

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).