Alpine V1 Directional + Flat Kick Tech – Features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider's performance in deep snow. The camber runs longer in the tail, providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Flex – 6.5 (1 Soft- 10 Stiff)

Directional – 0.8" Setback

New Age Progressive Death Grip – DEATH GRIP™ is a design theory that incorporates a reverse sidecut arc in the midsection of the board. This reverse camber arc provides a point of contact to apply pressure and retain control throughout the turn in both freestyle and freeride settings.

Thermopolymer Starship Core – Utilizing an advanced electronic sorting system allows us to select mega-premium, reforestation certified, Poplar graded by weight and grain consistency. Comparable to Paulownia in strength to weight ratio, this core retains the poppiness of Poplar, and then achieves a signature feel by adding bonded post-consumer recycled Thermopolymer channels to form an advanced hybrid core. This mega-premium core will blast you into space and beyond.

Glass + Resin – Pure Megacarbon Marine Grade Epoxy Resin

Inlaid Alloy Skid Plates

Megadrive XT + Moonshot Omni-Tune – The MOONSHOT OMNI-TUNE™ is an aftermarket high-performance race-base structure that wicks water from your base at a 45-degree angle making these boards super fast to the lift line or to the finish line

Screen Print

Metallic Underlay

2 x 4 Inserts

Response – 8 (1 Soft - 10 Stiff)

Toe Heel Stiffness – 8 (1 Soft - 10 Stiff)

Lateral Stiffness – 8 (1 Soft - 10 Stiff)

Carbon Auto Base

Heel Pedal – The heel pedal activates the automatic closing of the hiback and straps, and locks the engagement system. This mechanism is self-cleaning to avoid snow build-up, and there are three engagement clicks for increased security.

Release Lever – Push to unlock the engagement system and lift your boot up & out. The release lever is located on the medial side of the baseplate for maximum ergonomic effi ciency and protection from external triggers.

Heelcup Roller – The heelcup roller reduces friction and guides the heel of the boot down, for buttery-smooth entry and exit.

Slip-N-Grip Plate – Reduces friction with the outsole of your snowboard boot. Allows you to easily slide in and out, without compromising the underfoot comfort of 2.5° Bankbeds.

Nylon Multidisk – 4HP + 3HP + Channel

Carbon S Ultraback

Reclining Highback – The Reclining Hiback creates the fastest automatic entry system. It fully folds down, creating a large opening to conveniently drop in your boot.

Exo-Kush Pro S Hybrid Straps

Hexo Toe Cap with Aux Tech – A 3D Hinged Auxetic pattern for unmatched formfitting the toebox of your boot.

Active Strap – As you recline the hiback, the footstrap gets actively lifted out of the way, so you can easily and conveniently get your boot in and out. The straps hug your boot with the tightness at which you first set them, each & every time you drop in.

LSR 2.0 Auto-Lock Carbon – Locking Slap Ratchet buckles lock down to secure your preferred footstrap tightness. Either Set-it and Forget-it for the Automatic mode, or just use them like regular buckles for the two-strap experience.

Drop In Technology – This technology was developed to allow easy opening and closure in complete safety. Multiple notches allow the binding to lock shut from the first click; there are three in total, which allow closure even if obstructed by snow accumulation. Just in case you’re in steep or off-camber terrain...or waist deep powder.

2.5 Degree Canted Footbeds