Balanced Freeride Geometry – Burton's Balanced Freeride Geometry ends the age-old twin vs directional debate with setback camber and a sidecut that is centered on your stance to create a twin freestyle feel when riding flat base, but on edge it turns tight and quick with the float and prowess expected from a directional deck.

Personality: 5-8 (Medium - Aggressive)

Infinite Ride – Burton's exclusive Infinite Ride technology maximizes pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you, ensuring your board will maintain its flex, pop, and feel from the first day forward, season after season.

Directional Camber

Directional, 10mm Taper, Directional

Dragonfly™ 600G Core – End-grain woods in the impact zones of the board, which lets them swap out heavier woods for lighter ones, without losing strength.

Multizone EGD™ – In four separate zones, the wood grain is perpendicular to the core adjacent to The Channel.

Squeezebox – Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Park: 1/10, All-Mountain: 7/10, Powder: 10/10

Super Sap® Epoxy – A bio-based epoxy resin formulated with plant-based materials that reduces the carbon footprint by approximately 50% compared to conventional petroleum-based epoxies.

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

The Channel® – Compatible with all major bindings and lets you dial in the stance exactly the way you like it.

Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.

The Hinge™ – Exclusive to EST® baseplates, this Burton-exclusive technology flexes dynamically with your leg for increased foot roll, less fatigue and easier ollies.

45% Short-Glass / Nylon Composite Lower – Carbon performance without killing your credit card.

30% Short-Glass / Nylon Composite Spar – Slightly more responsive than the 18% short‑glass/nylon composite, yet still plenty playful.

SensoryBED Cushioning System™ – Dual-density EVA automatically settles your boot into a natural position regardless of stance, width or angles for improved comfort, reduced fatigue, and more direct board control.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Heel Hammock – A reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightening fast response out of turns with your heel cradled in complete suspension.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Hammockstrap™ 2.0 – Everything Burton's team riders love about the Hammockstrap, but paired with Smooth Glide™ buckles for a reduced profile and more comfortable fit.

Supergrip Capstrap™ 2.0 – Minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featuring Ultra-minimized and fully injected with an over-molded design. Made ultra-durable, glue-less, stitch-less and PU-free construction. 3D curved with a triple axis spine as well as a true wrap toe window.

Smooth Glide™ Buckles – Lightweight aluminum and polycarbonate levers give you season after season of buttery smooth and reliable ratcheting power.

Mounts Exclusively with Burton Boards Featuring The Channel™

Re-Ground Materials to Reduce Waste