Parabolic Camber – The System utilizes rocker or camber profiles created using the parabolic arc, which progressively reduces the amount of rocker or camber toward the tip and tail of a snowboard. This creates low, more effective profiles. On Camber System designs, this guarantees the outside contact points do not dig too far into the snow, creating a cleaner, less catchy performance that makes it easier to turn, spin, and ride fast.

Flex Rating – 8-9 (1 Soft - 10 Stiff)

Directional Shape – 5mm Taper

Grip Tech 1.25mm – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

Highland III Core – A 5 / 20 blend of Poplar and Paulownia for lighter weight and higher performance. The HIGHLAND III has the highest ratio of Paulownia to Poplar

Double Carbon Stringers – Two carbon fiber stringers run from the tip to tail providing added pop, snap and landing durability.

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Bio-Plastic Topsheet – One of the materials Arbor uses in the quest to eliminate harmful petroleum based plastics from the production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.

Real Wood Powerply – From the beginning, Arbor's Powerply veneer topsheets have been made with sustainable sourced wood and bamboo material whose organic fiber drives performance through natural power, strength and longevity. The individuality of each slice of veneer provides every board a one-of-a-kind aesthetic that is otherwise impossible to replicate.

Bio-Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

2x4 Inserts – 14 Pack

Flex rating – 3 (1 Soft - 5 Stiff)

System X – The System X design evenly distributes a rider's energy into their snowboard. No matter where pressure is applied to the binding, the System X allocates energy across the baseplate's structural X shape, and out to the four cardinal points. The result is quicker, more effective control. 15% glass content for added strength and stability.

50A Durometer Outsole – The Outsole is a dampening interface made from a special TPE rubber. The Outsole integrates with the System X design and sits between the binding and a rider's snowboard. The Outsole diffuses high-frequency chatter while providing rebound and cushion for high-impact landings. On the Cypress, Arbor uses a slightly stiffer durometer TPE for added performance.

Adjustable Extruded Aluminum Heelcup – Highly durable extruded aluminum, designed to work with the Mini-Disk for amazing adjustability. Use the highback to center the foot and the disk to fine-tune your stance width.

Fiberglass Reinforcing – The Hemlock and Sequoia, feature a 15% glass content for a softer, more forgiving ride; while the Cypress have 30% glass content for added strength and stability

EVA Footbed

Tool-less Forward Lean Adjustment

Hemlock 2 Asymmetrical Highbacks with 5° Lateral Pre-Rotation

BioStraps – Arbor’s plant-based BioStrap takes the place of harmful petrol-based plastics focusing on heel lock and secure fit, with a comfortable curvature and low profile, single-injection ankle strap. Stronger, lighter, more sustainable, and the first of its kind.

Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.

Fiberglass Reinforced Nylon Buckles and Levers

Cast Aluminum Buckles and Levers – Offering ultra-reliable performance with long-term durability and a tighter, stronger click for an unparalleled boot-to-binding connection.

2x4 Universal Mini-Disc – Mini-Disks require less surface area and along with the System X help provide a more organic snowboard flex underfoot. They are channel compatible.