Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex Rating – 4 (1 Soft - 5 Stiff)

Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.

Radial Sidecut – Radial is the classic sidecut for consistent response forward and switch.

Aspen SLCT Core – Every single wood strip is hand selected to ensure unparalleled core quality and lightness.

Popster – Popster's shaped core profile is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.

Ghost Basalt Stringers – Basalt stringers are sewn into a trail layer for durable pop, control, and damp ride at speed, and easy maneuverability when you're keeping it mellow.

Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Gunslinger Sidewalls – These sidewalls implement carbon inlays that run the full length of the board to meet the reaction and shock absorption needs of all riders.

Area 51 Base – Built to go faster and fly higher, the Area 51 base is a high-density sintered base laced with a super secret wax formula and a specially engineered factory finish designed for air time and durability.

Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.

All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

30% Bio-based Resin – High performance with low environmental impact, this bio-based resin is made with 30% of its molecular structure derived from plants.

Natural Wax

2 x 4 Insert Pattern

Flex Rating – 3 (1 Soft - 5 Stiff)

ShadowFit Baseplate – 3-piece baseplate featuring a unique flexible heel loop and completely anatomical fit to provide intuitive mobility without sacrificing performance. The result is an ultra light binding that allows your whole kit to flex together.

Kevlar Quickwire – A Kevlar wire is anchored at the toes and triangulated around the heel cup, enhancing energy transmission and heel-to-toe response for quick edge to edge transitions.

30% Fiberglass Nylon Composite – More rigid than plastic, more durable and comfortable than aluminum. Performance is maximized, comfort is undeniable.

Adjustable Toe Ramp – Super easy to handle adjustability for the best possible transmission on toe edge.

Universal Disc – Ultimate compatibility with all existing mounting systems on the market.

Integrated Mounting System – Integrated Mounting System (IMS) is Salomon’s patented trick for keeping your disc screws in place while adjusting your bindings or swapping out boards.

Power Hook – This direct link between Kevlar Quickwire and baseplate maximizes the transmission on heelside turns.

Unite Disc Compatbility – The baseplate is compatible with Salomon's UNITE rental system.

Full EVA Basepad – Full EVA offers the highest level of shock absorption and precise energy transmission straight to your edges.

Mirage Highback – High performance women's highback with a medium flex pattern. Introduces a horizontal line at the top of the highback allowing flex at a strategic point to increase comfort around the calf.

12° Pre-rotated Shape

Asym Shadow Strap – Using a mold-injected asymmetrical design, this lightweight, durable strap provides comfort, increased ankle support, and reduced materials inside for maneuverability.

Supreme Lite Toe Strap – The Supreme Lite Ankle Strap provides a comfortable and secure fit using durable, lightweight materials and a mold-injected design.

MicroMax Strap Adjustments – Fast and precise micro adjustments let you optimize the straps centering on your boot for maximum comfort and support.

Women's Specific Geometry – Custom designed to fit women’s specific boot shapes, these 3D straps tightly hug your ankle no matter what the position.

MP Ratchets – Highest performing and quality ratchet found on all Shadow Fit bindings. Better tightening, less ladder damage, more power and precision with each click.

Aluminum Buckles – Providing the best of lightweight and quick and powerful cranking with a buttery release. Deep bite allowing a secure lock and smooth adjustment.

Canted Footbeds – Instantly add pop power and extra edge control to your riding with 2.5° canted footbeds. Easy on the knees and no loss of board-feel.

Responsive Flex – The stiffest flex available, aimed at aggressive riders who need the maximum performance from their boot.

Precision Harness – An adjustable internal heel strap that locks down your liner for maximum support.

Custom Fit – Heat moldable multi-density foams strategically placed in the sensitive areas of the foot, shin, ankle, and heel.

Precision Liner – Fully customizable fit

Full Custom Fit – Heat moldable multi-density foams throughout the entire liner.

H4 / M3 Dual Zone Boa® Coiler – Two separate dials and lace paths work with the boot’s cuff to isolate fit into two distinct zones. The upper zone dials in flex and stability, the lower zone locks the forefoot.

TX3 Boa® Lace – The TX3 Boa® Lace is a flexible, low-friction textile lace adapted to many fit configurations.

FUZE SURGE Midsole – Resilience, rebound and comfort with 30% natural rubbers, 78% recycled 3M™ Thinsulate™ insulation, and a QuickDry™ insole.

MTN GOAT Outsole – Long lasting traction underfoot with Contagrip® rubber