Free-The-Ride Camber – Designed for all-mountain prowess and float in the deep. Rockered in the nose, flat under the front foot, with a positive cambered tail.

Flex Rating – 8 (1 Playful - 10 Precise)

7.5mm Taper – Built into directional boards built with wider noses than tails helping with agile turns and added float in deep snow.

Directional Diamond 3D – Diamond 3D is designed for edge-catch-free riding and crazy float in powder. The Directional Diamond 3D is found only in the board's nose to help float in deep powder and crank long, smooth turns. Built for premium pow performance, while still being reliable on groomers.

Directional Tri-Radial Sidecut – Traditional tapered directional shapes typically lack snap and response, especially off the tail - this design provides performance, power, and stability throughout the entire turn without any compromise.

Carbon Omega Hotrods – Thin rods of carbon surrounded by an Omega wrapper are milled into the board’s core starting just inside the insert packs and extending into the nose and / or tail.

Flax Impact Plates – Flax Impact Plates are woven flax mats that are housed around the board’s insert packs, sandwiched between the core and topsheet. This horizontal layup works to withstand deep landings, distribute impact in variable conditions and increase the board’s overall lifespan without dramatically changing the board’s flex.

Directional Flax Walls – Directional Flax Walls are used in the noses of all-mountain boards providing additional stability and power to handle steep terrain and the impact associated with all-mountain riding.

SinterSpeed Base – Rome's fastest sintered base, built for maximum speed and performance.

2 x 4 Inserts

Flex – 6 (1 Playful - 10 Precise)

PivotMount – Provides 8 different strap adjustment options per side of the ankle strap, creating 64 total adjustment options. Flex can range from 6-8.

Asymwrap Platform – Rome's game changer of a chassis that revolutionized the idea of connected comfort. The AsymWrap heelhoop features three connection points to the baseplate, allowing for a surfy ride and plenty of board feel, without sacrificing tweakability or edge-to-edge response.

Footbed Canting – 2-Degree Dual Density

Baseplate Materials – 30% Glass / 70% Nylon

Forged Aluminum heelhoop for lightweight strength and durability

Highback Materials – 15% Glass / 85% Nylon

OmniFlex Ankle Straps – The next generation of AuxTech®-powered connected comfort comes in the form of Rome's most responsive ankle straps. A solid state overmolded design engages with a TPU spine to perfectly blend responsive torsional flex and edge-to-edge power

ProGrip Toe Straps – Rome's game-changing strap built with the legendary hold of AuxTech®, this one-piece design provides next-level locked-in hold and undefeated comfort.

AUXTECH – A Rome-first innovation, AuxTech® is a game-changing pattern used in ankle and toe straps. Auxetic patterns are geometric patterns that are essentially a network of tiny hinges that expand evenly when pressure is applied. Best-in-the-game surface area pressure distribution and connected comfort: that’s AuxTech®

BombProof Buckles – A one-piece forged aluminum construction for better grip and durability.

Flex Rating – 6 - 9 (1 Soft - 10 Stiff)

Instep Flex Zone - Boa Specific – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Exocap Molded Toe Protection – A molded plastic toe cap provides maximum protection and extra space in the toe box to keep your toes wiggling and warm.

V3 UltraCush Liner with FlashDry™ – UltraCush interior cushioning layer with The North Face FlashDry™ for superior wicking performance / Expanded Comfort Flex neoprene forefoot / Updated X-Cage for superior heel hold / Dual-density, heat-moldable core / Closed-seam microsuede cuff and tongue

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

Hybrid Plus BOA® Fit System

V3 PopCush Footbed – Tri-density POPCUSH construction / OrthoLite® open-cell foam top layer / TPU arch support heel clip provides stability while allowing torsional flex / Advanced 3D-molded anatomical shape / Anti-fatigue coring design / Airflow perforations / Nylex moisture-wicking top sheet

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Waterproof Zipper Shroud and D Ring – This feature is a durable and weatherproof fabric shield that protects the lower part of your boot from snow, ice, and moisture, ensuring easy access to your Boa closure no matter what the weather throws at you. It also features a metal D-ring for securely fastening your pant gaiters to lock out snow.

Adaptive Range Mode – Features a Rear Drop-Cuff that can be unlocked to widen the cuff opening for expanded range of motion while walking or skinning.