Camber – Precision, control and pop. The side profile of camber looks like a rainbow. Tried and true, camber has been the dominant board bend in the snowboard industry for almost 40 years. Adopted from the bend of alpine skis, camber snowboards deliver precise turning and edge control, with spring-loaded pop due to the bend in the board, providing better jumping characteristics. Advanced riders tend to prefer this bend, especially for hard carving and high-speed riding. However, they are not as forgiving of mistakes and can be more difficult to learn or progress on than a rocker or hybrid bend.

Flex Rating – 6 (1 Soft - 10 Stiff) - Playful and relaxed. A mid-soft flex lets you get creative across the whole mountain, from park hits to powder butters.

Light Core – Nidecker's lightest core is composed of three wood types, including featherweight paulownia and super responsive poplar. Hardwood beech stringers down the center enhance the overall strength and boost pop.

Premium Sandwich Construction – A step up from the standard sandwich construction that adds carbon stringers for more pop, quicker edge response and improved shock absorption.

Biax Plus – Biax Plus retains the properties of Nidecker's tried and tested 90° biaxial fiberglass weave with more glass to enhance power transfer. It's uncompromising in its response and energy return, and loved and coveted by riders searching for a good blend of stiff & damp wherever they rip.

Pop Carbon – Strategic placement of carbon fiber from the tail to the rear inserts, and from the nose to the front inserts, resulting in a more reactive board, with increased pop and stiffness. It's vibration dampening qualities make it ideal for more aggressive riding in all conditions.

N-7000 Extruded Plus Base – Developed exclusively for Nidecker, the N-7000 Extruded Plus combines the durability and low-maintenance of an extruded base with the hardness of a sintered one. Minimum effort, maximum glide.

Diecut Base

Absorbnid – This innovative top layer has been developed to absorb unwanted vibrations allowing for responsive and dynamic boards that still give you a smooth and comfortable ride.

Matte Finish

Overprint

2x4 / 6 Inserts – 6 rows of inserts at 2 cm intervals gives you maximum choice of stance width and works with any binding on the market.

Flex Rating – 4 (1 Soft - 10 Stiff)

Nylon + Axis Kush Unibase – The Axis Kush Unibase features a canted BankBed and fixed heelcup perfectly matched to Nidecker boots. Its asym design with off-axis PowerBeams enhances edge control, while rockered corners preserve natural flex. 30% Glass Fiber / 70% Nylon

Nylon + Electron – The Electron's subtle 3D design is curved enough to match your boot while offering enough freedom to style out tricks. Minimalist, tools-free forward lean and longer side-arms make it super adjustable. 100% Nylon

Hexo Toecap – The Hexo Toecap strap features AuxTech®; a 3D hinged auxetic pattern that expands evenly over your boot for next level comfort.

Exo-Frame – A classic ankle strap featuring an AuxTech® frame that expands evenly around the boot for a perfect fit. The upper ExoSpine helps spread pressure and locks in your boot for unequalled comfort and performance.

AuxTech® – A 3D hinged auxetic pattern that expands evenly over your boot for top level comfort.

Aluminum Axion Ratchet – Bomb-proof aluminum ratchets that can take the heaviest of knocks and enable lightning fast entry and exit time after time.

BankBeds – Footbeds with a 2.5º canted contact surface for optimal ankle and knee alignment and efficient energy transmission.

Multi-Disk – 4HP + Channel

Quick-Set Latches – Adjust your straps on the medial side to fit the boot and keep them centered. Quick-Set Latches are tool-free, simple and secure, with numbers on the ladder to help you quickly dial in your setting.

Flex Rating – 6 (1 Soft - 10 Stiff)

1:1 Lasting – This new new last is the keystone of the boot - the best fit in snowboarding today. Nidecker landed on an 8° forward lean - the sweet spot between comfort and performance. 1:1 Lasting means a specific liner, shell and footbed for each full and half size. Women’s, men’s and youth boots seperate lasts for full anatomical accuracy

3D Molded Tongue – The asymmetric 3D Molded Tongue features a sharper curve on the medial side to match your natural forefoot shape. This design eliminates pressure points and delivers more balanced comfort and support than a traditional straight tongue.

3D Molded Toebox – The 3D Toebox eliminates extra layers and seams around the forefoot, improving water resistance and durablility. The streamlined design also makes it easier to slide your boot in and out of the binding.

Articulating Cuff – An overlapping shell design allows independent upper movement, delivering super smooth flex without pressure points

Silver Liner – The Silver liner can be heat molded for a custom fit and features a Custom Flex Zone at the toes, 8mm PE foam, and added PU support. A separate cuff connected to the shell ensures easy entry, while Velcro patches on the tongue secure the fit.

Shell Harness – Pull the inner laces to tighten a shell-mounted harness. Velcro secures the tongue.

3D Liner Support – Awesome foot hold that starts right inside the liner, with 3D molded material and J-bars around the ankle. Minimal movement, maximum control.

Asym 3F – Part of the ASYM3F Technology : FIT - FEEL - FLEX are combined in an asymmetric shape and closure system that delivers optimum support and flex. Lined up along the asymmetrical molded tongue, the Boa® Fit System lace guides are also asymmetrically positioned on the flatter areas of your forefoot for less point-loaded pressure and a more even closure, which increases medial arch support to reduce foot fatigue and cramping. This Nidecker innovation is codeveloped with and approved by Boa®.

H4 Coiler™ BOA Technology – Effortless and fast, the Coiler quickly takes up lace slack, increasing speed of entry into the boot. Ready for anything, designed to withstand

Dual BOA

OrthoLite X35 Insole

Surface Outsole – Inspired by lunar exploration, the Surface outsole combines the latest rubber traction underfoot with plush EVA cushioning. The lugs are shaped for even smoother entry and exit when paired with Supermatic® bindings.

Moldable Liner – Made from advanced memory foam, our moldable liners adapt to your foot shape over time or can be heated in store for an instant, personalized fit. Experience zero pressure points and maximum comfort.

Exo Spine – An external backstay that supports the whole boot and transfers energy instantly from heel to toe. It connects seamlessly to the outsole via our Transition Zone, so you won't hook up on the binding's heelcup when you enter or exit your binding.

Armor Tech – This bombproof TPU strip wraps around the front of the boot to shield it from abrasion and protect your toes when you're kicking in steps. It also prevents the boot from packing out too much, prolonging its life.

KPU – A unique injected polyurethane that's 100% waterproof, allowing us to create seamless uppers with high abrasion resistance and consistent flex.