Flatrock – Flat between the bindings, and with more rocker in the nose and tail for easy maneuverability and forgiving performance.

Flex Rating – 4 (1 Soft - 10 Stiff)

Full Wood Core – This is the standard poplar core with beech reinforcements. The beech in the nose and tail adds pop and stiffness for better response. If you like a consistent ride with lots of life, this is the core for you.

Classic Sandwich – Nidecker's standard construction uses well-proven, high quality materials that allow Nidecker to produce great performing boards that don’t break the bank.

Biax Standard – Nidecker's tried and tested 90° biaxial fiberglass weave.

N-5000 – The N-5000 is a universal base designed to absorb wax and retain it longer. Exceptionally durable, this base will take you anywhere.

4 x 4 Inserts

Soft Flex – A playful and surfy flex is ideal for beginner or park riders.

Nylon+ Axis Baseplate

Nylon Multidisk – 4HP + 3HP + Channel

Nylon+ Axis Uniback

Comfort Fit Fusion Straps

LSR Buckles

Quick Set Latches

Articulating Flex Zone – The upper boot cuff is asymmetrically connected to the lower boot allowing the ankle to flex naturally while providing support without shell distortion.A thermal insulation barrier between the outsole and the bottom of the liner keeps the warmth inside and the cold outside.

3D Molded Tongue – The asymmetrical tongue is 3D molded and curved towards the medial side, following the naturally raised ridgeline of your forefoot to alleviate pressure points and give a more balanced feel of comfort and support. An anatomically correct and asymmetrical tongue performs better than a standard straight one.

3D Molded Toe Box – These toebox designs eliminate extra layers and seams around the toe of the boot to create a durable and streamlined design with less bulk and a better FlowFit on your foot, and a better FlowFit in your bindings.

1:1 Lasting – This new new last is the keystone of the boot - the best fit in snowboarding today. Nidecker landed on an 8° forward lean - the sweet spot between comfort and performance. 1:1 Lasting means a specific liner, shell and footbed for each full and half size. Women’s, men’s and youth boots seperate lasts for full anatomical accuracy

3D Liner Support

Bronze-Level Thermo Heat Moldable – Customizable fit and feel are made affordable, with the Bronze Level Heat Moldable liner. Targeted thermo-form foam, Nidecker's innovative and comfortable reverse-cut top cuff, multi-layer J-bars and tethered liner lacing with a no-drift Velcro custom closure offer comfort and performance that make for happy feet whenever they’re strapped in.

Liner Lacing Closure

Single Dial Boa® Configuration – The Boa® Single Dial technology boots features the Boa® H4 dial over the tongue provide strength and ease of tightening by using just one reel for the entire boots.

Asym 3F – Part of the ASYM3F Technology : FIT - FEEL - FLEX are combined in an asymmetric shape and closure system that delivers optimum support and flex. Lined up along the asymmetrical molded tongue, the Boa® Fit System lace guides are also asymmetrically positioned on the flatter areas of your forefoot for less point-loaded pressure and a more even closure, which increases medial arch support to reduce foot fatigue and cramping. This Nidecker innovation is codeveloped with and approved by Boa®.

H4 Coiler™ Technology

3D-Molded Single-Density – Pre-molded and anatomically shaped comfort EVA supports your feet, and a silicone top-print adds traction to the fleece-lined footbed.

Gravity + – Made out of lightweight and durable EVA, Nidecker shaped the lugs in the same way as the rest of our outsoles - by taking cues from mountain play-grounds, then adapting them to give you as much grip as possible