Camber Directional – Camber Hybrid Technology. Full contact and control in all conditions, "Awesome Everywhere". Central rocker builds in carve, edge hold & float, while cambers build in pop, stability and control.

Medium - Stiff – Stout enough to charge your hardest but without excessive harshness.

Directional

75% Aspen / 25% Paulownia

Triaxial / Biaxial Fiberglass

Birch Internal Sidewalls

UHMW Sintered Sidewalls

UHMW Tip / Tail Impact Deflection

Eco Sublimated TNT – Fast and low maintenance, this base accepts wax easily and stands up to punishment.

Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.

Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.

Art by Mike Parillo

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

2 x 4 Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Two Piece Chassis – The two piece design combines responsive aluminum and polymer for a precise ride. It features an adjustable aluminum heel cup and a mini pivot disk with toe / heel centering in the heel cup.

Magnesium Fiber Drive Plate – Fiberglass panels in the footbed create specific flex patterns similar to your snowboard for personalized binding response. The dynamic energy of the advanced composites gives you a flex control advantage like no other binding can.

Canted footbed / Heelshock Pad

Power Polymer Nylon Highback

Grip Form Toe Strap – Features a secondary flexible panel that forms to any boot for maximum grip.

Dual Band Ankle Strap Medium – The medium flex power band has a mid-range size surface area for a supportive response and comfortable ride in the broadest range of conditions.

Forged Aluminum Buckles – Hardened for ultimate strength. Lightweight with smooth entry and release.

The Cube – Fastest and easiest forward lean adjuster ever. Dual durometer urethane dampening. Four different angles: 10°, 14°, 18°, 22°

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.