Directional Camber Profile – The most responsive camber profile in the line features camber running from in front of the front foot to the tail of the board with slight early rise in the nose. This gives the rider the most precision and control possible in any terrain while still floating effortlessly in the deep stuff.

Flex Rating – 9 (1 Playful - 10 Precise)

Directional – Confident & Aggressive

S1 Core – The smooth-flexing cousin to the A1 core, K2's new S1 core in designed to be damp underfoot and stronger than hell. Constructed from bamboo, aspen, and paulownia, the S1 core lets each wood do what it's best for. Tip-to-tail bamboo stringers add snap, durability, and dampening underfoot, and are balanced out by lightweight paulownia in the midbody, tip, and tail to help reduce swing weight. Underfoot, aspen and bamboo are placed at 30° angles to increase strength, supercharge edge-to-edge response, and increase pressure distribution along the edge.

Spectral Braid™ – K2’s Patented Spectral Braid is a first-of-its-kind variable angle reinforcement that allows for precision tuned torsion and flex by altering the fiber orientation along the length of the snowboards. This makes snowboards feel lively, energetic, and remarkably composed.

SpaceGlass™ – An American made Aerospace grade precure fiberglass core insert used to provide unmatched structural performance at reduced weight. SpaceGlass™ inserts increase edge hold along contact points, reduce chatter, and provide unequaled durability.

Carbon Power Fork™ – Pre-cambered Carbon Power Fork™ additives are strategically shaped to offer greater response and energy return by increasing the width toward the tail - allowing for more material to be engaged, and more energy to be created the harder the tail is flexed. Adds snap to ollies, increases edge pressure, and gives energy in and out of turns.

Wax-Infused Sintered 4001 Base – Built using the hardest and fasted sintered base material on the market, the Wax-Infused Sintered 4001 Base holds wax longer than other sintered bases for smoother, longer lasting glide.

SnoPhobic Topsheet – Helps eliminate snow buildup when it gets deep.

Recess3D Topsheet – By reducing the amount of materials in low-stress zones, K2 is able to reduce the swing weight of your snowboard, while also reducing chatter in the tip and tail - all without sacrificing strength.

2 x 4 Inserts

Flex Rating – 7 (1 Soft - 10 Stiff)

Module™ Chassis – Featured on all K2’s new bindings, the Module chassis is composed of a fiberglass infused nylon, and minimizes “dead” board flex zones directly underneath the binding. This in turn allows the rider to feel the flex and response of the entire board length, while providing maximum support, security, comfort, and vibration damping.

3° Sugarcane EVA Canted Harshmellow™ Footbed with Pods – Derived from scrap native sugarcane raised with minimal impact on rainforests, the footbeds on the Module chassis represent a huge leap toward the goal of carbon net-neutrality. Integrated with K2’s proprietary Harshmellow™ technology, these eco-conscious footbeds provide grip, cushion, and performance for all day riding in every condition.

This Grips™ Basepad – K2’s proprietary rubber compound, integrated onto the bottom of the Module chassis, provides vibration damping and cushion between board and binding, reducing fatigue and joint impact.

Team Highback – K2’s new Team Highback harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Forward Lean Block

Single Density Ankle Strap – K2’s new single density ankle strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

Single Density Toe Strap – K2’s new single density toe strap harnesses the strength and sustainability of the castor bean, and represents a huge step toward the goal of carbon net-neutrality.

MultiMount™ Ankle Strap Mount Points – Featured on the Module™ Chassis, mulitple mount points for the ankle strap on the Module chassis allow for a fine-tuned, custom fit.

Flex Rating – 8 (1 Soft - 10 Stiff)

Articulating Cuff Upper with HDR Premium Synthetics

Intuition® Pro Foam 3D Liner with SpaceHeater™ – A liner designed for comfort and warmth, from start to finish. It features reflective heat blanket panels that work to trap heat in and keep cold out. These reflective heat blankets work alongside heat moldable Intuition® foam, internal J-Bars, and 3D molded dual-density EVA insoles to keep your foot comfortable and warm all day long.

3-Point Harness Liner Lacing System – The 3-Point Harness is a straightforward solution that doesn’t skimp on support. This system aims to optimize heel hold, while providing ankle support and unrivaled stability to help reduce fatigue.

H4/M3 Focus BOA® Fit System – A two reel BOA® Fit System that allows for the upper and lower zones of the boot to be tightened independently

TX3 Lacing – BOA®’s first textile lace in the snowboarding category, TX3 is constructed from recycled PET with a structural core. This lace provices a softer, more flexible look similar to the characteristics of a traditional lace but the superior closure of a BOA® system.

3D Dual Density Footbed

Vibram® V5 Outsole – Vibram® V5 Outsole features a full EcoStep rubber (30% regrind) with and Harshmellow™ pods under the toe and heel to reduce noise underfoot. The V5 Outsole is the perfect combination of sustainability and performance.

Harshmellow™ – Harshmellow™ is a magical dampening system that replaces industry standard foam dampening materials. Harshmellow™ is strategically placed to dampen vibration underfoot to provide for a more “quiet” feel underfoot, reduce vibration from impact, and reduce fatigue while snowboarding.

Endo™ 2.0 – Endo 2.0 is the most technically advanced boot construction available. An injected heel counter construction adds strength and durability to your boot, giving it the same response season after season. The Endo 2.0 design allows for a more precise and smooth flex with a snappy rebound to power you out of any landing or turn. With an ultra durable TPU construction, the Endo 2.0 provides lasting comfort, response and durability for all styles of riding.

S’Cafe™ Coffee Mesh – With functionality and sustainability in mind, K2 coffee mesh is made from recycled post-consumer coffee grounds that is combined with post consumer recycled polyester. This mesh enhances odor control and moisture management of our standard lining mesh and is made from 95% recycled material with no added chemicals.

Eco-Friendly Packaging – 80% Recycled FSC® Certified Carboard Packaging / 99% Recycled Packaging Paper