C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders.

Medium-Firm Flex

Directional

Mild Volume Shift – Ride this board 2 cm shorter than your normal board.

G Lite 2 FCS Certified Aspen + Paulownia Core – Light, strong, and poppy.

Triaxial / Biaxial Fiberglass – Strong and poppy

UHMW Sidewalls – Tough and fast

Sintered Knife-Cut Base – Fast, Tough and Holds Wax

Magne-Traction® – 7 strategically located and sized edge serrations provide unreal edge hold and control in all conditions.

Eco Sublimated Poly Top – Tough and environmentally nice.

Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.

2 x 4 Inserts

Flex Rating – 8 (1 Soft - 10 Stiff)

Auto Chassis

Offset Multi-Disk – The Offset Multi-Disk can be mounted on 4x4, 4x2, and the M6 Channel – without the need for an accessory channel-disk. The hole patterns are offset from the center for more toe-heel or stance-width adjustability

Slip Plate – The Slip Plate creates a smooth surface for your boot to slide across during entry and exit. Extra large UHMW panel sheds snow.

Canted footbed / Heelshock Pad – Canted 3° footbed padding centers riders balance while increasing drive and pop. Heel Shock Pad provides extra absorption from hard landings.

Solid Power Highback 8/10 – Solid highback design directs power for 100% control. Asymmetric shape provides ergonomic support for comfort and drive.

Auto Highback & Straps – When activated the highback flips up and the straps automatically close like magic.

Dual Band Ankle Strap Soft – A smaller surface area with a large cored compression window creates a soft and extra comfortable flex great for all mountain riding.

Flip Fit Toe Strap – oe strap can be flipped to customize fit on your boots. Leave in stock position for most boots or flip long side down for boots that are in the largest edge of fit range

LSR 2.0 Buckle – Second Generation Slap Ratchet automatically locks the buckle in place in both directions as soon as you stop ratcheting. No need to manually lock. Instantly dial in your preferred strap tension (for use with speed entry) or make quick adjustments on the fly.

Revolutionary Cube – Simply spin cube for the desired forward lean angle. It’s fool proof. Easily adjust on the hill. Urethane construction absorbs shock and vibration. Visual indicators let you know angle selected. In 3° increments from 10°~19°

Release Lever – Simply press and hold the Release Lever to lift boot up and out to exit binding.

Heel Pedal – Just insert foot and step on heel pedal to activate highback and strap closure.

Heel Roller – Ensures your boot easily slides in and out catch free with no friction.

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.