System Camber – If you want a highly responsive ride, crisp on-edge performance, and more pop for carving and ollies - all with smoother camber performance - then System Camber shapes are for you. The camber progressively reduces toward the tip and tail, making the leading edge less aggressive for cleaner on-snow performance.

Flex Rating – 7-8 (1 Soft - 10 Stiff)

Directional Shape – 6mm Taper

Grip Tech 2.25mm – A tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed.

1.5° Fenders – 3D shaping lifts the contact points for improved turn initiation without shortening the camber section of the board. As a result, you get a clean ride without any loss of the pop that comes from full-length camber.

Highland III Core – A 5 / 20 blend of Poplar and Paulownia for lighter weight and higher performance. The HIGHLAND III has the highest ratio of Paulownia to Poplar

Mixed Glassing – A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.

Vector Netting – A diagonal grid of Technora aramid fiber reinforcements that creates evenly distributed torsional power and accelerated response.

360° Fully Wrapped Sidewalls – Eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.

Sintered Base – A higher molecular weight, sintered base that provides added durability and speed.

Recycled Steel Edges – Highly durable, recycled steel edges embody Arbor's key values: quality and sustainability.

Factory Tuned – Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.

Bio-Plastic Topsheet – One of the materials Arbor uses in the quest to eliminate harmful petroleum based plastics from the production cycle. Made from castor bean oil, this eco-topsheet is extremely durable and water repellent.

Real Wood Powerply – From the beginning, Arbor's Powerply veneer topsheets have been made with sustainable sourced wood and bamboo material whose organic fiber drives performance through natural power, strength and longevity. The individuality of each slice of veneer provides every board a one-of-a-kind aesthetic that is otherwise impossible to replicate.

Bio-Resin – Bio-Resin is a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into it are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% when compared to its petroleum based equivalent.

Wend Natural Wax – All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.

2x4 Inserts – 14 Pack

Flex rating – 4 (1 Soft - 5 Stiff)

System X Baseplate – Transfers rider input out to four heel-and-toe convergence zones, improving communication and control of your edge. The System X baseplate limits the binding’s direct contact with the board to the disk and convergence zones, creating a more natural flex underfoot, reducing binding flat spots, and eliminating rigid board contact.

Top Is Made with A Firmer Material for Added Durability and Improved Board Feel

Impact Absorbent Heel & Ball Area Pods for Big Landings and Harder Snow

Footbed Has a 1.5º Built-In Cant for A More Ergonomically Aligned Ride

Dual-Density Footbed Design

Adjustable EVA Footbed

30% Fiberglass Content

Asymmetrical Highbacks – Arbor bindings feature low mounted asymmetrical highbacks with 5° pre-rotation, providing ergonomic feel and freedom of movement.

BioStraps – Arbor’s plant-based BioStrap takes the place of harmful petrol-based plastics focusing on heel lock and secure fit, with a comfortable curvature and low profile, single-injection ankle strap. Stronger, lighter, more sustainable, and the first of its kind.

Bow-Strap Adjuster – Arbor's patented "Bow-Strap" adjuster and ladder strap swings out of the way quickly and easily, making binding entry a simple, user-friendly experience. The pre-curved strap steers clear of your boot while maintaining form and durability in even the coldest conditions.

UltraGrip Convertible Toe Strap – All Arbor bindings feature a flexible, comfortable, and secure fit on or over the toe of any boot

Cast Aluminum Buckles and Levers – Offering ultra-reliable performance with long-term durability and a tighter, stronger click for an unparalleled boot-to-binding connection.

2x4 Universal Mini–Disc – Mini Disc’s require less surface area and along with the System X help provide a more organic snowboard flex underfoot. Channel compatible.

65A Durometer Outsole

Flex Rating – 5 - 9 (1 Soft - 10 Stiff)

Vans Flex Control System – Removable high-rebound Hytrel® tongue stiffeners allow riders to custom-tune their flex. Slide them both in for maximum support, use just one to provide either increased lateral or medial response or leave them out for a softer-flexing boot. As boots soften up over the course of a season, you can add the tongue stiffeners back in to extend the life of your boots.

Instep Flex Zone – The Instep Flex Zone functions to maintain natural ankle flexion in your boot, whether in or out of your bindings.

Asymmetrical Flex Zone

Powercuff Strap – Providing extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue.

Pleasurecuff – The supple elasticity of the PleasureCuff delivers a cushioned, comfortable fit that keeps your calves supported.

V3 Ultracush with TNF FlashDry Liner – The most advanced liner ever from Vans, this inner features The North Face's FlashDry fabric, which transfers and eliminates moisture. An UltraCush layer provides all-day comfort with minimal seams, and a neoprene forefoot gives a natural flex. A dual-density heat-moldable core is bolstered by the latest X-Cage--extra security and heel hold that keeps you in contact with your board at all times.

V3 Boot Harness – This advanced support harness delivers the highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected.

Vans Hybrid Plus Boa – The Hybrid system merges traditional lacing with the power of Boa closure at the instep. The Hybrid Plus system expands the range of flex control by adding an extra Boa pass around the back of the boot and across the instep to optimize the lines of pull and maximize flex control.

Vans Custom Slide Guide – Anatomical shape provides adjustable fit anywhere along the instep area for added comfort and unrivaled heel hold.

V3 POPCUSH Footbed – A triple density footbed that combines impact cushioning with energy transfer, the V3 POPCUSH fights fatigue with anatomical shaping, arch support, a moisture-wicking topsheet and OrthoLite® open-cell top foam.

V3 Superenduro Waffle Outsole with All-Trac™ Rubber – Inspired by the extended cross- country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing? A TPU toe pick? Check, check, and check. There’s no keeping up with this all-terrain apex predator.

Waterproof Breathable Valves – Moisture management through waterproof valves ensures breathability--meaning dry socks, dry feet, and a more comfortable and longer ride.

Heat Retention 360º – All Vans snowboard boots feature a newly improved thermal retention layer that provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort.