Freestyle Rocker – Larger tip rocker and tail rocker combined with camber underfoot. More playful, more fun, with enough camber underfoot to maintain a solid edge contact on hard snow.

Freestyle Flex | 5-6-5 – Solid underfoot platform with a round, progressive flex into the tip and tail. A close-to-symmetrical flex for performance going forward and backwards.

Elliptical Sidecut – The sidecut consists of an elliptical arc that begins at boot center and gets progressively smaller as it extends toward the tip and tail of the ski, resulting in a ski that carves harder the more it is put on edge, yet remains stable when skied flat.

Bamboo Core – The heart of every pair of ON3P ski is a FSC-certified, vertically laminated, 100% bamboo core. Bamboo provides a responsive, yet damp characteristic to their skis that everyone has grown to love.

Carbon Fiber – Provides strength, rebound, responsiveness, and stiffens torsionally and longitudinally.

Tri-Axial Fiberglass – 19 oz or 22 oz tri-axial fiberglass provides torsional and longitudinal stiffness, ensuring proper edge hold and power transfer.

Extra Wide Binding Mat – An additional layer of fiberglass mat prevents pullouts. To ensure proper coverage for all types of hole patterns, ON3P runs their mat full width on every ski they make. Their binding mat is double-biax fiberglass, increasing torsional stiffness.

Vibration Dampening Strips (VDS) – VDS rubber is applied to the edges and sidewalls, acting as a shear layer that provides improved bonding strength and vibration dampening.

UHMW Sidewalls – UHMW (Ultra High Molecular Weight Polyethylene) is an incredibly strong material, has a higher abrasion resistance than steel, and resists cracking.

1.8mm 4001 Durasurf Sintered Base – ON3P's Durasurf 4001 base material provides their skis with better glide and protection from damage compared to any other sintered and extruded base material, and is 50% thicker than the industry standard.

2.5mm x 2.5mm Extra Thick Edges – ON3P uses a 3/4 wrap for their 2.5mm x 2.5mm Rockwell 48 steel edges. The 3/4 wrap allows the tips and tails of the skis to flex, decreasing the risk of delamination.

Factory Detuned – To help minimize rail damage and provide a catch-free experience.

Nylon Topsheet – Sublimated nylon topsheet is chip-resistant to ensure you always look your best.

Made in Oregon – Every single pair of ON3P skis is built by an ON3P employee in their Portland, Oregon factory. No shortcuts of OEM here -- they do it themselves. Design, build, sell.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.