Tip & Tail Rocker – Bends up only in the shovel and tail zones, with a camber shape in the middle.

3D Radius Sidecut – Three radii in one ski shape deliver maximum versatility - long radii at the tip and tail for stability and smoothness, and a short radius in the mid-body allows the skier to switch from long arcs to short turns at will, at any speed.

Multilayer Woodcore – The combination of beech and poplar results in an extremely durable wood core composed of hard wood in the binding area and lighter wood surrounding it.

Tailored Titanal Frame – The size of the frames is tailored to the skier's height, skiing ability and power. This means that longer ski models have a higher titanal content for more stiffness, more direct power transmission and stronger dampening. The shorter the length, the lower the titanal content, which makes the ski more agile, so that smaller, lighter and less powerful skiers can use the full potential performance of the ski.

Tailored Carbon Tips – In this innovative manufacturing process the new Tailored Carbon Tips are produced by embroidering the individual carbon fibers onto a carrier material. This allows them to be positioned exactly along the stress lines, opening up completely new possibilities, for performance at the front of the ski, which has a decisive influence on handling.

Full Sidewall – Direct and strong power transmission with full length sidewalls.

P-Tex 2100 – A sintered high-density and high molecular weight polyethylene base with great gliding characteristics and high durability.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Full Action Toe | 45 mm Elasticity – Featuring 45mm of elastic travel and 180⁰ multi-directional release, the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Dual Standard Concept (ISO 5355 Alpine and GripWalk) – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine and GripWalk soles.

28mm Vertical Elasticity – 28mm of elasticity in the heel (the most of any binding on the market) yields a reduction in unwanted pre-releasing.

Turntable Heel – Look’s unique turntable design rotates directly under the tibia for reduced risk of injury and provides 28mm of elastic travel to deliver unmatched shock absorption for significant reduction of pre-release.

Smaller Mounting Zone – The shortest mounting zone of any alpine binding available provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex.

7 Points of Contact – More points-of-contact with the boot results in increased lateral energy transmission, drives more power to the edge of the ski and provides superior control, response, and snow feel.

Rolling Control – Look binding components are designed to deliver industry-leading roll coupling strength (boot-to-binding interface). This ensures minimal roll before the boot engages the binding for the most efficient power transmission in skiing.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 100 mm – Designed for average width feet with average and slightly taller insteps.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Flex: 100 – A medium flex for balanced power and response.

Memory Fit 3D Gold Liner – Features Asymmetric Liner Construction with an asym tongue, toe box, collar shape and high-quality lining materials.

3M™ Thinsulate™ Insulation – Keeps feet warm and responsive even in extremely cold and damp conditions.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Energy Backbone – A reinforced, asymmetric backbone providing extra strength for powerful skiing plus enhanced lateral energy transmission for better edge grip.

Shell – Polyurethane

Cuff – Polyurethane

Forward Lean – 15˚

3˚ Shell Rotation

6000 Series Aluminum Buckles

40mm Velcro Strap

Cantable Gripwalk Sole Pads