EST Freeride Rocker – Forebody rocker and extra tip taper combine to create EST for optimized float in the soft stuff. Positive camber under foot with no tail rocker ensures these skis stay on rails when carving is the priority.

Flex (1=Soft, 10=Stiff) – Tip: 5 | Mid: 6 | Tail: 6

Caruba Core – Armada's lightest wood species creates the best uphill feel while retaining the power and dampness required for descending in the gnarliest of terrain. This core makes no concessions in its quest to be ultralight.

TI Binding Dampener – Below the binding, a sandwich of rubber, titanal, and finally more rubber works to dampen vibration that otherwise chatters into your bots and shortens your day. Ski bell to bell with extra damping provided.

Carbon Reinforcement – Specially placed carbon stringers add pop and stiffness without adding weight.

Comp Series Base – Sintered UHMW polyethylene with added carbon aids in speed and durability on snow.

1.7 Lightweight Edge – Light and strong, these heat-treated edges effect the feel of the ski minimally to ensure a snappy, lightweight feel.

AR Bat Tail Self Center Tail Clip Design

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Dual Mode Toepiece – MNC (Multi-Norm Certified) for skiing, including Alpine, Grip Walk, WTR, and ISO 9523 soles. Converts to a tech toe for touring (requires a boot with tech toe fittings).

Automatic Wing Adjustment – Automatic adjustment just by stepping-in. You can forget but nevertheless trust your binding!

Toe Height Adjustment – Adjustable toe height to let you switch between different boot norms.

Easy Step-In – Less effort needed to step-in and out of bindings

XL Wings – Long wings for a great envelopment of the boots.

Lateral Elasticity – 47mm

Sliding Toe Pedal

Freeski Brakes – Self-retracting brakes for a close position to the heel so they never catch.

Hike and Ride Switch – Lever at toe shifts between hike and ski mode.

Accessing Toe for Touring – 1. Pull back on block between toe wings to open tech arms. 2. Depress front lever to widen arms to step in. 3. Pull up on lever to lock arms securely for skinning.

Preparing Heel for Touring – Pull back on the brake pad and fix the brake in the "up" position by stepping down on the pad.

Climbing Aids – 2° & 10°

MNC (Multi-Norm Certified) – Certified for use with ISO 5355 Alpine, ISO 9523 Alpine Touring, and WTR (Walk To Ride) boots.

Tech Toe Fittings Required For Use In Uphill (Touring) Mode

Requires Boot with Full Heel and Toe Lugs – Not compatible with boots like the Dynafit Hoji Pro Tour and TLT, Atomic Backland, Salomon X-Alp and Arc'teryx Procline, among others. These boots have shortened or non-existent lugs and will not fit into the Shift in downhill mode.

Low Profile Chassis – Low stand height for increased terrain feedback and enhanced power transmission.

Oversized Platform – Wide footprint and double aluminum frame tubes create a super strong interface between boot and ski. Ensures maximum lateral power transmission.

+Elastic Travel – Ultimate elastic travel to hold in boots during impact in order to go bigger with no risk of pre-release.

Compatible with Salomon S/LAB Shift Crampons

Carbon-Infused PA Construction

Adjustment Range – 30mm

Height – 30mm

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 98 mm – Narrow forefoot with relaxed ankle and heel volume. Can be heat molded using the custom heat molding process to approximately 104mm in the forefoot.

Custom Shell HD – Salomon's proven heat molding process makes boot fitting most feet quick and easy - the latest Custom Shell HD version is even quicker to mold than before. The thinner wall construction and new shell materials allow the foot to be closer to the shell and provide enhanced sensations, more power and direction energy transmission.

Flex: 120 – A stiff flex suitable for expert level skiers.

My Custom Fit 3D Freetouring Liner – New pattern for a wider fit to avoid pressure points and new foam construction for cushier foothold and better durability.

Motion Flex – Touring cuff construction with a carbon and composite fiber spine. Allows for a high range of motion when skinning while guaranteeing a true and progressive alpine flex.

Sensifit Shell – Soft insert that allows for easy and smooth step-in.

Shell – Grilamid + Custom Shell HD

Cuff – Pebax

Surelock Ski Walk Mechanism – Bomber and low profile walk lever is positioned at the same level as the upper buckle to promote quicker transitions.

47˚ Range of Motion

2 Light Alloy with Lock System

50 mm Dual Claw Strap

Gripwalk Soles

Integrated Tech Inserts – Low-tech inserts are integrated into the shell, making it complementary to touring bindings, so you can experience reliability and direct power transmission when skinning up.