All Mountain Rocker – 20% Tip Rocker / 70% Camber / 10% Tail Rocker

Directional Shape

HRZN 3D Bent Tip and Tail – The Bent family uses the liveliest HRZN 3D, employing a full wrap tip and tail profile for more playful skiing in freestyle terrain.

Light Woodcore – Made from poplar wood, this core optimizes the ski's weight without sacrificing any shock absorption or stability.

Dura Cap Sidewall – Sidewall for power transmission combined with a small cap for durability.

Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.

Resist Edge Park – Thicker and stronger edges to better withstand the rigors of the park

Base Edge Angle – 1.3˚

Side Edge Angle – 3˚

Glossy Topsheet

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

180˚ Multi-Directional Release – A true mechanical upward release that functions independently from the heel for the most effective multi-directional protection in the case of a fall.

Full Action Toe | 45 mm Elasticity – Featuring 45mm of elastic travel and 180⁰ multi-directional release, the Full Action toe piece delivers best-in-class retention and release and increased coupling strength (boot-to-binding interface) for maximum power transmission.

Dual Standard Concept (ISO 5355 Alpine and Gripwalk) – Look strategically reinforced the toe housing, increased the toe ramp, elongated the toe-wings, and created a toe that is compatible with both ISO 5355 Alpine and GripWalk soles.

Toe Lateral Elasticity – 45 mm

Turntable Heel – Look’s unique turntable design rotates directly under the tibia for reduced risk of injury and provides 28mm of elastic travel to deliver unmatched shock absorption for significant reduction of pre-release.

28mm Vertical Elasticity – 28mm of elasticity in the heel (the most of any binding on the market) yields a reduction in unwanted pre-releasing.

Smaller Mounting Zone – The shortest mounting zone of any alpine binding available provides less swing weight, improved response, and a deeper, rounder, more consistent ski flex.

7 Points of Contact – More points-of-contact with the boot results in increased lateral energy transmission, drives more power to the edge of the ski and provides superior control, response, and snow feel.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Last: 98 mm – A narrow last suitable for those with narrower than average feet (heat customizable to fit many average width feet).

Adaptive Fit Cuff System – These boots come with a special spoiler in the back of the cuff. If you want a classic, cozy fit around the calf you can just leave the spoiler in. If you want more volume you can take the spoiler out. This makes the boot cuff slightly lower at the back, more tuliped and more open (equivalent to one cuff size larger). It's quick, easy and you don't need tools.

Memory Fit – Advanced heat-fitting technology creates a fully personalized shell, cuff and liner in minutes. The key is Memolink, Atomic's special additive that improves the moldability and stretch of their plastics. Expansion can be up to 6mm forefoot width and up to 10mm ankle width, resulting in a permanent and complete anatomical fit in minutes. See your bootfitter for details.

Flex: 100 – A medium flex for balanced power and response.

3D Silver Liner – Features Asymmetric Liner Construction with an asym tongue, toe box, collar shape and high-quality lining materials.

Shell – True Flex Polyurethane

Cuff – Polyurethane

Energy Backbone – Asymmetric cuff design directs more stiffness to the medial side of the cuff.

Prolite – Instead of starting with a standard construction and cutting material away to save weight, Prolite does the opposite. It starts with the slimmest possible profile and then builds up reinforcements in key areas where strength is needed - like the Energy Backbone down each boot spine.

Forward Lean – 15˚

3˚ Shell Rotation

40mm Velcro Strap

Cantable GripWalk Grip Pads – ISO 23223 Type A