Skip to Main Content

Fox Racing 34 Float Factory FIT4 Step-Cast Fork - 29"

This item is Out of stock.
But fear not - there is plenty to explore...

Fox Shox Fox Racing 34 Float Factory FIT4 Step-Cast Fork - 29"

sku# 208466
Fox Shox - Fox Racing 34 Float Factory FIT4 Step-Cast Fork - 29"
Model Info

FREE SHIPPING

This item qualifies for Free Shipping! Details.

This item is

Out of Stock

But fear not - there is plenty to explore...

Shop all Fox Shox Shop sale Fox Shox

MEMBERSHIP

Earn up to 10% back in rewards. Learn more. Join Free.

EASY RETURNS

Take up to a full year to return your item! See our Return Policy.

LOWEST PRICE GUARANTEE

Find a better price? We’ll beat it by 5%. See our Price Match Policy.

Product Info

As cross-country bikes have adopted geometry and skill sets from trail and enduro bikes, the push for lightweight suspension has been fierce. The Fox Racing 34 Float Factory FIT4 Step-Cast Fork brings all-over tuneability to a 120mm fork, making it a featherweight version of a big enduro bruiser. Fox's Step-Cast construction means all these features won't weigh you down, should a race break out. There's a new breed of cross-country riders out there, and this is the fork they trust for pushing through more technical terrain.

Product Details

Construction & Measurements

New Lower Leg ArchStiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Our all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding.

New Lower Leg ChannelsAs a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.

Kashima Coated StanchionsThe smoothest of the smooth, plus it looks cooler. The gold Kashima coating has become synonymous with friction-free suspension actuation, and it's only available on Fox Factory components.

1.5" Tapered Steerer

Features

FLOAT EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression.

Rotor Size160 Direct Post Mount, Up to 203 Compatible

Adjustments

FIT4 3-Position Remote DamperIn its fourth generation, this patented closed cartridge system provides 3 on-the-fly compression damping positions--open, medium, and firm--to adapt to varying trail conditions. This Factory Series model also has 22 clicks of low-speed compression in Open mode, along with 10 clicks of low-speed rebound, all of this is on top of initial air spring pressure and volume spacer compatibility, making for a very tunable setup.

Pressure BleedersLower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness.

Specs

  • Used For: Cross Country
  • Wheel Size: 29"
  • Axle Configuration: 15 x 110 Boost
  • Stanchion Diameter (mm): 34
  • Maximum Rotor Size (mm): 203
  • Weight (g): 1496
  • Warranty: 1 Year
Size 120mm, 15x110 QR, 44mm Rake
Fork Travel (mm) 120

Other Notes

Fox Shox products can only be shipped within the United States

Reviews

Q&A

Related Buying Guides

;
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location