Camber – Camber is the base of snowboarding: you need to have enough edgehold to drive in and out of turns. The camber does exactly that, allowing you to drive your turns longer and release later.

Flex Rating – 7 (1 Soft - 10 Stiff)

Bi-Polar Midbite – . This new Midbite has a deeper inlay on the front of the board than it has on the back. This creates a taper as the edge goes out 2mm less than on the nose giving you a slight taper on a twin shape.

Poplar / Paulownia / Bamboo – Creates a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Triaxal Glass

Sintered True – True Sintered bases are harder and more expensive than extruded, and can be faster for those that ride aggressively.

Art by Guillaume Rousseaux

2 x 4 Insert Pack

Flex Rating – 5 - 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 is Nylon with 30% Glass Fiber

Kingpin Tool-Less 2.0 – No tool required—switching from your park to pow board with one set of bindings or changing your bushings on the fly, has never been faster or easier, with now’s kingpin tool-less tech.

Post – Nylon with 50% Glass Fiber

Canted 2.0 Footpillow

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over Now's original strap. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA. The end product is a comfortable and lightweight binding strap.

3D Pro-Grip Toe Strap – Non-slip and grip is what you will have with the 3D Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

NOW Tool-less Adjuster Straps

PA66-GF Buckle Levers – Made with the same high grade nylon and glass fiber blend found in Now posts and discs. This material is light and strong.

Skate Tech – Inspired by how easily and efficiently a skateboard turns, major components of Now's system mimic both the function and description of skateboard trucks. The Hanger powerfully transfers energy input from the straps to the bushings and onto the edges of your board. The Kingpin acts as a fulcrum, magnifying this energy through leverage. Traditional bindings diminish energy transfer by the flexing and bending of their baseplate, forcing you to crank your straps down harder, ride with more forward lean, or run taller and stiffer highbacks. This all leads to more foot fatigue and pain. NOW Bindings bypass the middle of the snowboard and direct your energy right onto the board's edges. They simply transfer more power to the board with less work, meaning your feet will stay more relaxed and comfortable, longer.

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong

Bushings – Available in Soft (40 shore), Medium (45 shore), and Hard (55 shore)