Skip to Main Content

Spark R&D Surge Pro Splitboard Bindings - Women's 2022

This item is Out of stock.
But fear not - there is plenty to explore...

Spark R&D Surge Pro Splitboard Bindings - Women's 2022

sku# 183782
Spark R&D - Surge Pro Splitboard Bindings - Women's 2022
Model Info
This item is

Out of Stock

But fear not - there is plenty to explore...

Shop all Spark R&D Shop sale Spark R&D

MEMBERSHIP

Earn up to 10% back in rewards. Learn more. Join Free.

Product Info

When you're way out in the boonies hammering up a skin track, you feel every single gram on your feet. That's why the Spark R&D Surge Pro Splitboard Bindings incorporate premium materials and custom-made components designed to trim weight wherever possible, resulting in an insanely lightweight binding that still has the power to charge. Built with their stiffest, most responsive Carbon Reinforced Rip ‘N’ Flip Highbacks, the Spark R&D Surge Pros promise unparalleled precision, power, and composure in big mountain terrain. If you spend your winters going deep into the backcountry in search of hero lines, these are for you.

Product Details

Tour Mode

Tesla T1 SystemTesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing WireA single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

T1 Heel RestThe T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

Ride Mode

Snap to RideT1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

Baseplate

CNC Machined AluminumCNC machined baseplates with maximum cutouts to shave weight yet maintain strength and performance. Cutouts also conveniently allow for puck adjustment with bindings in place for precise stance adjustment.

7075 Aluminum Heel Loops7075 Aluminum heel loops are thinner and lighter than standard heel loops while maintaining the required strength.

Straps

Pebax® Pillow Line StrapsPro Pillow Line Straps are made with Pebax® plastics, a premium material most often found in high-end ski boots as it provides consistent stiffness and improved toughness in cold temperatures while being 20% lighter.

Buckles

Buckles & Pebax® PlasticsLadders and adjusters are produced in-house with Pebax® premium thermoplastics which maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. It's also 20% lighter than Spark's standard material. All straps incorporate Burton's time-tested bomber buckles.

Highback

Carbon Reinforced Nylon HighbacksPro Series Rip ‘N’ Flip highbacks are made from carbon reinforced nylon for better response, stiffness, and weight than standard glass reinforced highbacks. All Rip ‘N’ Flip highbacks incorporate a tool-free forward lean adjuster (FLAD) for complete customization from 0° to 22° in ride mode. The FLAD toggles easily between forward lean position and -13° touring position for easy transitions.

Compatibility

Puck CompatibilitySlide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Additional Features

Pro HardwareWeight savings add up by replacing stainless steel hardware with custom-made 7075-T6 aluminum hardware. Aluminum parts are 65% lighter than our standard stainless steel parts and are made with hex drives instead of phillips heads which are less likely to strip.

Snap Ramps, Touring Brackets, & Pivot PinsT1 System bindings slide sideways into the offset Tesla touring bracket and are locked into place with the snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal. Pivot pins have been hollowed out and are 33% lighter than standard pins.

In The BoxBindings, Tesla touring brackets, T1 heel rests, aluminum mounting screws, and Spark pocket tool.

Requires Spark or Voile Pucks - Sold Separately

Specs

  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Mounting Pucks: No
  • Made in the USA: Yes
    Yes
  • Warranty: 5 Years
Size XS​/S M​/L
Weight (g) 1166

Other Notes

Spark R&D products can only be shipped within the United States and Canada

Reviews

Q&A

Related Buying Guides

;
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location