3 Stage Rocker – A flatter center curve for speed and rail control with exaggerated exit angles through the tip/tail to give a bucking pop off the wake.

7 (1 Soft - 10 Stiff)

Single to Double Venturi Hull

Edge Channels

PU (Polyurethane) Core – Liquid Force's PU core is compression molded to the highest standards and has been the lightweight, durable go-to for years.

Pro-Glass Combo Layup – Liquid Force engineered unique combinations of special fiberglass weaves to give you the ultimate performance and response on and off the wake. This custom blend of materials increases the board's strength, improves flex rebound, and reduces weight.

Vector Net – This unique carbon weave adds specific strength properties to boards that your standard fiberglass cannot achieve.

RX Quad Fin Setup – For that sharp, aggressive biting feel.

FlexTrack Mounting System – FlexTrack is the industry's first flexible binding track! The track moves with you and the board as you twist into carves and press onto rails creating an unmatched connection, making you and your board one.

8 – (1 Soft - 10 Stiff)

Rear Flex Zones – Welded PU and Lycra create a unique flexzone that helps promote an incredible amount of motion.

Medium-Wide Fit

Articulating Cuff – Featured on the pro models, an articulating cuff allows maximum range of motion. The upper flexes independently like a hinge without material buckling.

Reflex Liner – The Reflex features a tongue design that wraps your ankle for a better fit and more supportive flex. The Reflex liner tongue has tapered edges reducing material overlap inside the binding. This feature reduces bulk and eliminates air gaps for a snug, full contact fit. The notched top cuff improves your range of motion and has a better fit. The Reflex also has a 3D molded Impact EVA bottom featuring 2.5 degrees of cant, toe lift, a deep heel cup, and a supportive arch underneath your feet.

Dual Lacing – The dual lace zone system allows the lace tension to be different in the lower and upper zones. This gives the rider a custom fit for a secure and comfortable feeling.

4D Chassis Flex Track System – The 4D Chassis has the smallest footprint in the industry! The small footprint allows the board to perform at its truest flex, giving you maximum response. The 4D construction also reduced the weight by 15%. This means a more responsive binding, softer landings and a more comfortable ride. NOTE: 4D Bindings are only compatible with Liquid Force Flextrack boards.

Honeycomb Flex Floor – Absorbs impact, reduces the weight of the binding, and provides performance driven flex.

45° Angle Attachment Points – Located under the rider's foot to increase leverage and create better board response and flex wtihin all directions.

Molded Quarter Panels