Directional Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex Rating – 10 (1 Soft - 10 Stiff)

Directional Flex Pattern

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

12.5mm Taper – The tapered shape sinks the tail in pow for better float and quicker turns.

Blunt Nose – "How a board glides in powder, crust, corn or any snow more than an inch deep is dictated by it's front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the 'snow plow' rounded tip and it's extra swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

V-Core – Boards with V-Cores are slightly softer in the very center of the board for improved maneuverability and stiffer through the tip and tail for stability and pop.

Power Core – Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.

Ultra Construction – The Ultra series is the redefinition of what it takes to build a snowboard. Jones Ultra boards combine innovative construction techniques with premium materials for revolutionary results.

Fusion Carbon – This cutting edge board lay-up process is the latest evolution of our previous Fusion Tech construction and reduces board weight and improves durability by combining board materials in two stages.

Power Plates

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Ultra Base – Jones exclusive base material that sets new performance standards. Lab results and snow testing show 25% better wax absorption, better glide in warm/wet snow and better durability for grinding. They've also doubled the amount of wax and mixed multiple wax types for a faster factory wax in a wider range of conditions.

Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Recycled Edges – From 2010 to 2024, every board ever made was built with 100% recycled edges.

FSC™ Ash Veneer – Thin wood veneer layer that functions as both a protective topsheet and a global reinforcement layer. The thin wood stringers that make up the wood topsheet provide even flex and suck up chatter from uneven snow conditions.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

2 x 4 Insert Pattern

Float Pack Inserts – Float Pack Inserts give you the option of a super setback stance for guaranteed float on the deepest days.

Flex Rating – 9 (1 Soft - 10 Stiff)

Response Tri-Foam Foot Pillow – Premium full length foam footbed made with three different densities of EVA foam. The heel and toe are soft for max comfort, the center is mid-stiff for precise response and the bottom of the footbed is stiff for solid support.

Carbon Reinforced Hanger 3.0 – Binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit. Nylon reinforced with 30% Recycled Carbon Fiber.

Flushcup Technology

Asym Flax/Carbon Wide-back – Designed for maximum reponse. Flax/Carbon composite highback with extended width upper section for improved toe-side turn response. Made from Flax and 3K Carbon fiber.

Asymmetrical Shape Follows Leg Angles

Extended Upper Wing for Improved Turn Response

Tool-Less Forward Lean Adjustment

Highback Flex – 9 (1 Soft - 10 Stiff)

Power Spine Ankle Straps – Two part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-It Strap compatible (Surf mode vs Freeride mode).

3D Flex Fit 2.0 Toe Straps – 3D Flex Fit 2.0 toe straps dynamically stretch to fit any shape boot. The new minimalist design is even lower profile and every bit as comfortable, durable and responsive as the original design.

Intelligent Straps – Hinge connectors keep your ankle strap out of the way when you step in to strap in, and curved ladders make it easy to line up the buckle and quickly ratchet down.

Tool-Less Strap Adjustment

Hinge Connector Strap Attachment + Pre-Curved Ladders

Asymmetrical Buckles – Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increase speed of entry and release.

Freeride Mode – Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings for maximum response.

Surf Mode – Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings for a looser, more dynamic surf feel.

Included Bushings – Hard - All Mountain / Freeride Mode

Skate Tech – The components of the SkateTech design mimic the function of a skateboard truck. The “Hanger” acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Traditional bindings lose energy when the baseplate flexes and bends unevenly. The energy loss forces you to crank your straps tighter and ride with more forward lean to gain the same control. Uneven pressure and tight straps lead to more foot fatigue and pain. By evenly pivoting over the “Post”, the middle of your board flexes more uniformly and your energy inputs are focused directly on your edge. Your feet stay more relaxed and more comfortable because the bindings transfer power to the board with less work.

Universal Mounting Disc – Compatible with 4x2, 4x4 and EST/Channel

Nylon, Recycled Carbon Post