Nanoprene Lite Japanese Limestone Neoprene – Nanoprene Lite uses earth-minded limestone to replace processed petrochemicals in the neoprene for a reduced dependence on petroleum. It is soft, light, warm, and has unrivaled memory and rebound.

Plush Thermo Lite [Chest and Lower Body] – A thermo-generating yarn maximizes warmth without adding weight.

Dope-Dyed Yarn – Dope-dying infuses dye pigments into a molten plastic solution to produce colored yarns without the dyeing process. This saves tremendous amounts of water while reducing energy consumption and water pollution.

Water-Based Glue – XCEL turned solvent-based laminating glue into water-based glue, eliminating harmful, volatile organic compounds (VOCs).

Watertight Zipper

100% Performance Stretch

Engineered Fit System Fits Like a Second Skin

51˚ - 62˚ F

Triple Glued and Blind Stitched Seams – A water-tight seam construction where foam edges are glued multiple times before being slammed together creating an air and water tight seal, then stitched a quarter way through the foam to give it the strength needed.

Glide Skin Collar – A durable, smooth skin collar creates a water-tight seal to prevent flushing.

Fusion X Seam Tape [Lower Body] – The next generation precision tape technology, applied by a machined heat-pressure process which bonds tape directly to suit ensuring maximum seam durability while eliminating the need for excess glue that causes irritation.

"S" Seal [Upper Body] – Durable, flexible outer seam composite for an even better seal.

Duraflex Knee Panels – Comfortable, durable knee panels that stretch with you.

Drylock Neoprene for Unmatched Warmth and Performance

Lightweight, Quick-Dry Fibers – Hydrophobic fiber repels water, minimizing absorption so your booties stay lightweight during use.

Single Rubber Bottom for Durability and Board Feel

Ergonomically Angled Hook-and-Loop Strap

3 Dimensional Foot Mold for a Contoured Fit

Pull Up Ankle Loop – This pull loop is pressure bonded to the heel for durability. In addition, there is no stitching from this process so less water can get into you booties.

Split Toe, Solid Sole – Flexible, high performance boot design for enhanced range of motion: The solid sole underneath the split toe means no more of those annoying leash hangups.

Drylock Ankle Seals – An XCEL exclusive, this seamless, engineered "donut seal" construction keeps more water out, minimizes flushing, and forms a snug, comfortable seal and a better fit with your wetsuit.

Taitex Outer Seam

49 - 58°

Always rinse thoroughly inside and out with fresh water after every use. Hang to dry.

Plush Thermo Lite – A thermo-generating yarn maximizes warmth without adding weight

Lightweight, Quick-Dry Fiber – Hydrophobic fiber repels water, minimizing absorption so your hands stay lightweight during use.

Glued and Blind Stitched Seams for Durability

Engineered Design for a Contoured Fit

Cinch and Smooth Skin Seal for Less Flushing