FREE SHIPPING
This item qualifies for Free Shipping! Details.
But fear not - there is plenty to explore...
Shop all Salomon Shop sale SalomonMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
EASY RETURNS
Take up to a full year to return your item! See our Return Policy.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
The early riser, putting in the extra work to lay down fresh powder tracks. Get a setup that makes the most of the time you put in with the Salomon Speedway Splitboard. Setback camber for control and stability, with a responsive flex that's designed for a fun ride in all conditions. Saddle up for the uphill and let 'er run on the downhill -- the Salomon Speedway Splitboard is made to go the extra mile. Includes climbing skins.
Backseat Camber – Camber/Flat variation with a larger stance setback gives you maximum stability and control without the threat of catching an edge.
Responsive Flex – A stiffer flex helps connect you with your board. It's stiffness allows for quicker turns, easier edge hold and impressive stability at speed.
Quadratic Sidecut – A blend of elliptic curves for easy turn initiation, effortless direction changes and fluid edge to edge transitions.
Tapered Directional – Tail width is slightly tapered (10-15 mm). This loosens up turning initiation and improves flotation in deeper snow without sacrificing edge hold on hardpack.
Ghost Green Core – The Ghost Green core components have been selected and designed to optimize pop and reduce weight while utilizing the sustainable attributes of super light paulownia wood.
Popster – Maximize the natural snap and powerful pop of wood with Popster's shaped core profile. Feels like your skateboard kicktail finally connected with your snowboard.
CFX Superfiber
Honeycomb + Cork
BA MD – Biaxial Medium Density Fiberglass - A fiber tech core that increases board life and durability for all riders.
ABS Sidewalls – Salomon's Acrylonitrile Butadiene Styrene is a mouthful, so Salomon calls it ABS, the best material for sidewalls. The molecular structure can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.
Sintered EG – Engineered for a super fast glide in everything from fresh pow to sticky spring snow. Sintered material provides superior wax retention, Gallium strengthens impact resistance, and the Electra finish gives a turbocharged glide.
Fine Stone Finish – Speed up in powder or softer snow conditions.
All-Mountain Edge Bevel – Detuned tip and tail, a 1° edge holding tune throughout the key parts of the sidecut, back to a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.
Includes Climbing Skins
Size | 160 |
---|---|
Effective Edge (mm) | 1190 |
Tip Width (mm) | 296 |
Waist Width (mm) | 249 |
Tail Width (mm) | 290 |
Stance Setback (mm) | 15 |
Stance Range (mm) | 500 -620 |
Width | Regular |
The new Spark R&D Spark Pucks give you almost unlimited stance options for splitboards with standard insert patterns. The oversized aluminum discs overlap the binding channels for enhanced rigidity and mount strength. Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models.
4 discs and 4 baseplates
Aluminum / Nylon
Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering
Plus or minus 30˚ angle adjustments
Infinite stance width and setback options
Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models
The Spark R&D Surge Splitboard Bindings are built for backcountry performance, pure and simple. They're lightweight, durable, and uncomplicated, so you can get to the matter at hand: laying waste to all that pow. They feature Spark's Tesla T1 technology, a marvel of practical simplicity. Just snap the toe ramp down and you're connected. In ride or tour mode, there's no wiggle, no jiggle. Say goodbye to lost pins and frozen fingers, this is a true gloves-on transition situation. The Surge is beefier than the Arc, with a solid baseplate design, but is by no means heavy. Clever without being too smart for its own good, it features the integrated Whammy Bar and stiffer Flip'N'Rip highbacks with more supportive straps. All of this adds up to a dialed and bombproof splitboard binding. Spark R&D has paved the way, the rest is up to you.
Tesla T1 System – Tesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.
Whammy Bar Climbing Wire – A single built-in fatty climbing wire with a side arm lever. You can switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring, thanks to the T1 Heel Rest.
Snap to Ride – T1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.
CNC Machined Aluminum – Built for big days on big lines, the Surge's solid baseplate design is preferred by heavier and more aggressive riders. Still quite lightweight, it offers maximum control and durability.
Pillow Line Straps – Surge Pillow Line Straps are lightweight - 53% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride.
Burton Buckles – All straps incorporate Burton's bomber buckles. Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests.
Rip 'N' Flip Highback – The Surge highback has a high amount of glass fiber fill for a stiff ride and maximum response. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.
Compatible with Spark R&D T1 Heel Locker
Compatible with Spark R&D Ibex Crampons
Puck Compatibility – Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.
In the Box – Bindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.
Weight – 1.49 lbs/ea (676g) - 2.98 lbs/pr (1352g) - Medium
Requires Spark or Voile Pucks - Sold Separately
Size | S | M | L |
---|---|---|---|
Weight (g) | 1352 |