110mm VPP® Suspension – VPP is based on the patented principle of having two short links rotating in opposite directions. This system provides huge design flexibility, allowing Santa Cruz to manipulate shock rates to the intended purpose and character of each model; from short travel endurance bikes to World Championship winning DH machines.

Carbon CC Frame – Santa Cruz's highest grade CC-level carbon frame is every bit as stiff and strong as their C-level frame, but weighs about 280 grams less, due to the use of lighter, stronger, and more expensive carbon fiber. Santa Cruz is also able to truly integrate the shock mounts, pivot mounts, dropouts and disc brake tabs into the structure, using all uni-directional carbon plies. The shock mount isn't merely riveted or bonded on after curing, but is an integrated part of the fiber lay-up. This makes Santa Cruz's carbon frames incredibly strong and able to absorb impact better than any other frame they've tested.

Fox Float Factory DPS Rear Shock – For a lightweight, inline shock, the DPS packs a lot of performance. The Dual Piston Base Valve has dedicated compression and rebound pistons, providing a firm lockout without compromising bump compliance, ride control, or efficiency. "Factory" says it all. The best-of-the-best technology Fox has to offer is available in Factory Series models with the buttery smooth, and ultra durable Genuine Kashima Coat. These products are World Cup proven.

Shock Adjustments – Lever Actuated Open, Medium, Firm Modes / Open Mode Adjust Tuning Range / Rebound / Air Spring Pressure

Internal Carbon Tubes – Ensure precise and hassle-free routing of derailleur and seat post cables.

Bottle Cage Mount – Within the front triangle, fits piggyback shocks.

148mm Rear Axle Spacing

ISCG-05 Tabs for Chainguide Compatibility

Internal Cable Routing