USA S-Glass – A new Flyweight Pro fiberglass that features a more reactive weave. This results in a lively feel with added pop. Carbon patches target stiffness around the fin box adding power to bottom turns.

Flyweight Pro – A lighter is better mindset mixed with carbon laminates for added snap.

Handmade by Robots – Every surfer Ronix makes removes human error. All cores are machined to exact specifications.

Dome Top – Increases height of rider’s foot. This allows the board to roll from edge to edge faster. Increases buoyancy due to additional foam.

Fishhook Tail – A wider, squared off tail to maximize glide speed before the turn. Two pivot points allow the board to roll on edge.

Double-Dip Bottom Concave – A single thru-tail bottom concave with a double concave inside. The single concave creates lift and speed, and the double concave creates added acceleration when the board is on rail.

Transitional Rails – Gradually sharper edges in the tail. Better water-flow off the tail increasing speed and makes for a quicker release on the lip of the wave for tricks and spins.

Button Fin System – Typically with a fin attachment system the rider has to generate the force to release the fin. With The Button, the energy to release comes from the internal design - at your disposal for an effortless release with a simple press of a button.

Floating Fins – (2) 4.5 Flo Thru Left & Right Fins, (1) 1.8 Nub Fin

Do Not Store in Boat Board Racks – evo does not recommend storing your wakesurfer in boat board racks. Many wakesurf boards are fragile and can be easily damaged by these racks, which is not covered under manufacturer warranty.