Atomic Backland 108 W Skis + Salomon S/Lab Shift² MN 13 Alpine Touring Ski Bindings - Women's 2025 - Used
But fear not - there is plenty to explore...
Atomic Backland 108 W Skis + Salomon S/Lab Shift² MN 13 Alpine Touring Ski Bindings - Women's 2025 - Used
Model Info
Atomic Backland 108 W Skis + Salomon S/Lab Shift² MN 13 Alpine Touring Ski Bindings - Women's 2025 - Used
Out of Stock
But fear not - there is plenty to explore...
Shop all Atomic Shop sale AtomicMEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Looking for a powder hungry touring ski that doesn't weigh a ton? The Atomic Backland 108 W Skis + Salomon S/Lab Shift² MN 13 Alpine Touring Ski Bindings are the droids you seek. An all new construction with less environmental impact starts with a lightweight Poplar and Caruba wood core, uses less fiberglass and resin in the layup, and specs hardwood instead of metal for a binding retention plate, and since they still rip like Atomics we're totally in favor.
Product Details
Rocker Type
Powder Rocker – 25% Tip Rocker / 55% Camber / 20% Tail Rocker
Shape
HRZN 3D Backland Tip – Backland’s lightweight HRZN 3D uses a thin, perforated material to create a ski with low swing weight.
Core
Ultra Light Woodcore – Light Poplar and Caruba woods
Laminates
Reduced Fiberglass and Resin – Life Cycle Assessment analysis showed Fiberglass and Resin contributed disproportionately to the skis carbon footprint; more wood and less fiberglass, resin and metal reduces carbon dioxide equivalent emissions by 26%
Hardwood Binding Reinforcement
Topsheet with More Recycled Material
Sidewalls
Dura Cap Sidewall – Vertical underfoot with cap at the tips and tails
Base
Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.
Edges
Side Edge Angle – 3˚
Base Edge Angle – 1˚
Included Bindings
Bindings Come Mounted to Skis – Always have a certified binding technician mount and adjust your bindings.
Includes Salomon S/Lab Shift² MN 13 Alpine Touring Bindings – DIN Range 6 - 13
Specs
-
Terrain:
Big Mountain, Powder, Alpine Touring
More
Terrain
Big Mountain Big mountain skis are designed for charging big lines with high speeds and big airs. These skis varry in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer side, often with more rocker in the tip and less in the tail. Powder These skis are for the deep days. If you like to find powder stashes at your local resort, go on backcountry missions for the freshest of fresh or heli ski trips to BC, powder skis are what you need to stay afloat. Skis in the powder category are wide and most often have some form of rocker or early rise plus a relatively soft flex. Many powder skis today are versatile enough to handle mixed conditions and harder snow. Alpine Touring Also known as backcountry skis, alpine touring (AT) skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins. AT skis vary in width and weight, with the wider heavier versions usually used for winter/deep snow touring and the skinnier, lighter skis usually used for spring/summer/long distance touring.
- Skis: With Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Short
More
Turning Radius
Short < 16 m radius is best for carving.
- Core/Laminates: Wood
-
Tail Type:
Partial Twin Tip
More
Tail Type
Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
- DIN: Release Value Low: 6
- DIN: Release Value High: 13
- Warranty: None
| Size (cm) | 167 |
| Tip Width (mm) | 132 |
| Waist Width (mm) | 108.5 |
| Tail Width (mm) | 121 |
| Turning Radius (m) | 16 |