Balanced Freeride Geometry – Burton's Balanced Freeride Geometry ends the age-old twin vs directional debate with setback camber and a sidecut that is centered on your stance to create a twin freestyle feel when riding flat base, but on edge it turns tight and quick with the float and prowess expected from a directional deck.

Personality: 5-8 (Medium - Aggressive)

Infinite Ride – Burton's exclusive Infinite Ride technology maximizes pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you, ensuring your board will maintain its flex, pop, and feel from the first day forward, season after season.

Directional Camber

Directional, 10mm Taper, Directional

Dragonfly™ 600G Core – End-grain woods in the impact zones of the board, which lets them swap out heavier woods for lighter ones, without losing strength.

Multizone EGD™ – In four separate zones, the wood grain is perpendicular to the core adjacent to The Channel.

Squeezebox – Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Park: 1/10, All-Mountain: 7/10, Powder: 10/10

Super Sap® Epoxy – A bio-based epoxy resin formulated with plant-based materials that reduces the carbon footprint by approximately 50% compared to conventional petroleum-based epoxies.

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

The Channel® – Compatible with all major bindings and lets you dial in the stance exactly the way you like it.

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 30% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a medium‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Kickback Hammock – A lighter weight upgrade to the heel hammock, this two-piece heel hugging hiback is literally suspension in a hiback. Dynamic interaction between an internal spring and rubber over molded hammock results in increased response and reduced vibration while your heel is cradled in complete suspension.

30% Short-Glass / Nylon Composite – A high‑performance blend featuring ramped up strength in a medium‑flexing package.

Boot Compatibility – Must Be Used with Burton Step On™ Boots

Mounts Exclusively with Burton Boards Featuring The Channel™

Re-Ground Materials to Reduce Waste

Medium Flex: 4-7 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

1:1 Firm Flex PowerUP Tongue – Burton offers 1:1 lasting on every boot. It means every half and full size shell, tongue, and out sole offer a precise fit that is not as common as one would think. Drop your loot on a Burton boot and you won't be stuck with the slop of a mismatched shell and liner. PowerUP tongues feature additional dual-density material for rebound and durability.

Articulating Cuff – Allowing the upper and lower zones of the boot to flex independently creates fluid forward motion, minimizes shell distortion, and maximizes heel hold and response.

Asym Life Liner – The Life Liner fuses lightweight materials with a more relaxed feel for high-end performance that makes all the difference during long seasons filled with hard charging days. The responsive PU tongue construction provides a combo of cat-like quickness and long-term resistance to breakdown, while also accommodating a better fit for all foot shapes.

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Ankle Hammock

Hook and Loop Liner Closure

Triple Zone BOA® Wrap Lacing – All Burton men’s, women’s, and youth boots with BOA® feature the virtually indestructible, Warrantied for Life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner Coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

TX3 Lacing – The best of both worlds. TX3 is a flexible and low-friction textile lace used in high-power boots to provide a soft, modern design aesthetic with lasting durability and strength.

X Pro Flex Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.

Vibram® EcoStep™ Plus – Made of 30% recycled materials. This outsole has excellent grip and traction from rubber ice spikes but remains lightweight. ReBounce Cushioning, EVA and B3 Gel in the heel and toe area for extra comfort.

Compatibility – Must Be Used with Burton Step On™ Bindings