Directional Camber – A blend of rocker and camber in the nose combines float and control while camber under the back foot drives with power and stability.

Personality – 5 - 8 (1 Soft - 10 Stiff)

Twin Flex – The flex is perfectly symmetrical from tip to tail for a balanced ride that's equally versatile regular or switch.

Directional – The classic snowboard shape, designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while still giving you plenty of float, flow, and control to rip any terrain or condition.

Balanced Freeride Geometry – Balanced Freeride Geometry spec setback camber and a sidecut that is centered on your stance to create a twin freestyle feel when riding flat base. On edge it turns tight and quick with the float and prowess expected from a directional deck.

Pro-Tip – A tapered tip and tail thickness reduces swing weight for easier mobility.

12mm Taper

Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

45˚ Carbon Highlights – Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Recycled Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

The Family Tree Collection – Based on existing shapes, but tweaked to make them even better for your ultimate day of riding, the Family Tree boards come in a range of gender-neutral sizes and shapes built for all types of riders. Designed for powder, but capable of conquering any terrain, these deep-seeded shapes shine from the resort to the backcountry.

Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.

The Channel® Mounting System – Stronger, faster, easier, and more adjustable -- The Channel™ gives you ultimate control of your stance and your board in a design compatible with all major bindings (not just Burton's).

Channel Inserts Included – Channel Inserts are required to mount your bindings. Inspect packaging before disposing.

Medium Flex – The happy medium of binding flex. Medium flex models perform equally on all terrain. Great for progression - responsive, comfortable and forgiving.

Re:Flex™ Binding System – Offers more flex, feel, and cushioning than traditional disc bindings, in a package that's universally compatible with all current mounting systems, including 4x4, 3D® (via Burton Rider Service, sold separately), and the Channel®. The minimized, cored base-plate with Living Hinge™ disc reduces the weight and footprint of the binding, while also bending freely for a more natural flex.

Single Component 30% Short-Glass / Nylon Composite Baseplate – A high‑performance blend featuring ramped up strength in a medium‑flexing package. One material throughout creates consistent response and feel for all-terrain domination.

Re:Flex™ FullBED Cushioning System – Offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, the stealth trap door design makes it easy to access the mounting hardware.

FLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker you heel-edge turns. Crank them forward for icy hits in the pipe or back them off for jibbing. Tool-free and micro-adjustable for easy fine-tuning and maximum angle options.

Kickback Hammock – A lighter weight upgrade to the heel hammock, this two-piece heel hugging hiback is literally suspension in a hiback. Dynamic interaction between an internal spring and rubber over molded hammock results in increased response and reduced vibration while your heel is cradled in complete suspension.

30% Short-Glass / Nylon Composite – A high‑performance blend featuring ramped up strength in a medium‑flexing package.

Compatibility – Must Be Used with Burton Step On™ Boots

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).

Medium Flex: 5-8 (1 Soft - 10 Stiff) – A balance of quick edge engagement and a more forgiving, playful feel. Great for all-around riders.

Total Comfort Construction – Get an instantly broken-in feel right out of the box. Total Comfort's industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to day 100.

DryRide Heat Cycle™ Lining – Warmth and wicking are two key traits for on-snow comfort. Burton's breathable inner-lining technology utilizes interwoven thermally activated carbon thread to capture, radiate, and reflect body heat inward to keep feet warmer while also wicking heat-robbing moisture outward. Look for varying amounts and performance level of each liner.

Imprint™ 3 Liner – DryRIDE Heat Cycle™ Lining | Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock | Plush Cuff 1.0 (women's only) | Lightweight Power Panels | Velcro® Liner Closure | Level 2 Molded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating | Heat-Moldable

Dual Zone Boa® System with New Sequence™ and Coiler™ Technology – All Burton men’s, women’s, and youth boots with Boa® feature the virtually indestructible, warrantied for life performance of Burton‑exclusive New England Rope laces. Built with a redesigned inner coiler spool to route the laces, the dial‑it‑in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all‑day comfort.

The Step On® System – A clean and simple boot-to-binding interface that lets you step right in. No buckles. No Straps. No Fuss.

Step On™ EST® Outsole – EST® goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board. By eliminating the ramp angle of your outsole, EST lowers your center of gravity, improves board feel, and creates a more surf/skate-like feel.

Compatibility – Must Be Used with Step On™ Bindings