Directional Freeride Camber – Subtle rocker in the nose and tail provide additional float without losing stability. Camber underfoot provides confident edge hold and pop.

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Freeride with Slight Taper

91% Poplar / 9% Bamboo – Sustainably harvested, this blend keeps the board smooth and powerful.

Tip to Tail Carbon – Carbon fiber run through the entire core from tip to tail to provide added pop and response.

Tri-Axe Glass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Polyurethane – Polyurethane is poured during construction to form a single, unified piece of sidewall wrapping around the entire core for increased strength and durability. Because of this process, it also creates less waste material than other sidewall options.

Sintered Durasurf 4001 – The gold standard in bases. The 4000-series sintered bases have a higher density than other options on the market, and are therefore more durable. Additionally, it absorbs more wax, making for a faster and smoother ride. 4000-series PTEX is usually reserved for only top-of-the-line boards due to a higher manufacturing cost, but at Weston it’s the minimum standard.

Boltless Base

Rugged Topsheet – Polymide is eco friendly and made from castor beans. The topsheet is durable and resistant to scratches and scuffs.

Karakoram UltraClips and Active Joining – Karakoram UltraClips and Tip-Locks use Active Joining to spring load the seam of your splitboard, eliminating the rattling shearing, and rolling inherent to passive slip-fit connections. Simply close the lever to lock in the most responsive ride.

Rooted Inserts – The odds of pulling out inserts on a snowboard are about zero, but just to make sure Weston have reinforced all of the inserts areas with precision-cut sheets of flax. This improved durability and naturally dampens chatter. Additionally, flax is a sustainable crop and is good for the environment.

Split Tech – Weston doesn't skimp on their splits. You'll see a full inner metal edge, complete with sidewall and dampening tape. Also, when facing a kick-turn on a steep slope, you want all the help you can get - that's why Weston balance's their splits so that they are tail heavy.

Standard Splitboard Insert Pattern

Spring Loaded Pin System – By combining the standard pin system with the Split System baseplate, Union increases the amount of connection between board and binding. Just one pin changes the mode and locks it into place.

No-Nonsense Touring Mode – For touring, the binding slides into the climbing cradle and is locked into place with the pin.

Integrated Climbing Bar

Ride Mode – For riding, the binding slides onto the baseplate which rotates over the center of the board. The pin slides the through the middle of the baseplate for maximum connection.

Flex Rating – 7/10

SP2 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.

Extruded 3D Aluminum Heelcup

Exoframe 4.0 Ankle Strap – Rapid response, trusted by professional snowboarders.

TS 2.0 Toe Strap with Pin

Tool-Less Adjustability

Magnesium 3.0 Ratchets – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.

Magnesium S1 with Aluminum Base

EXP2 Duraflex ST – The perfect balance of flex and response for all types of riding.

Split FLAD 2.0 Forward Lean Adjust – Flip between walk and ride mode in an instant.

Fits Standard Splitboard (Voile) Insert Pattern

In The Box – Mounting hardware, Explorer split discs, Explorer Quiver Disk, touring brackets, splitboard strap.

Non-Stick EVA Disk Cover