Directional Freeride Camber – Subtle rocker in the nose and tail provide additional float without losing stability. Camber underfoot provides confident edge hold and pop.

Flex Rating – 6 (1 Soft - 10 Stiff)

Directional Freeride with Slight Taper

91% Poplar / 9% Bamboo – Sustainably harvested, this blend keeps the board smooth and powerful.

Tip to Tail Carbon – Carbon fiber run through the entire core from tip to tail to provide added pop and response.

Tri-Axe Glass – Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any ­terrain or snow conditions.

Polyurethane – Polyurethane is poured during construction to form a single, unified piece of sidewall wrapping around the entire core for increased strength and durability. Because of this process, it also creates less waste material than other sidewall options.

Sintered Durasurf 4001 – The gold standard in bases. The 4000-series sintered bases have a higher density than other options on the market, and are therefore more durable. Additionally, it absorbs more wax, making for a faster and smoother ride. 4000-series PTEX is usually reserved for only top-of-the-line boards due to a higher manufacturing cost, but at Weston it’s the minimum standard.

Boltless Base

Rugged Topsheet – Polymide is eco friendly and made from castor beans. The topsheet is durable and resistant to scratches and scuffs.

Karakoram UltraClips and Active Joining – Karakoram UltraClips and Tip-Locks use Active Joining to spring load the seam of your splitboard, eliminating the rattling shearing, and rolling inherent to passive slip-fit connections. Simply close the lever to lock in the most responsive ride.

Rooted Inserts – The odds of pulling out inserts on a snowboard are about zero, but just to make sure Weston have reinforced all of the inserts areas with precision-cut sheets of flax. This improved durability and naturally dampens chatter. Additionally, flax is a sustainable crop and is good for the environment.

Split Tech – Weston doesn't skimp on their splits. You'll see a full inner metal edge, complete with sidewall and dampening tape. Also, when facing a kick-turn on a steep slope, you want all the help you can get - that's why Weston balance's their splits so that they are tail heavy.

Standard Splitboard Insert Pattern

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Touring Brackets – Incorporates the best features of aluminum and thermoplastics. Spark R&D overmolds their custom plastic blend over and through the holes in the aluminum base, forming bushings that are incredibly durable.

Snap Ramps – Bindings slide sideways into offset touring brackets and are locked into place with our snap ramps.

ST Whammy Bars – A single fatty wire with a side arm lever. Overmolded thermoplastic sections allow you to switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Includes an overmolded sleeve of plastic on both sides of the bar, right where the climbing wire contacts the baseplate. This reduces friction allowing for super smooth movement into and out of high, low, and stowed positions.

ST Whammy Bar Climbing Wire – Built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire deployment and transitions.

T1 Heel Rest – Catches the climbing wire in the 12° and 18° positions.

CNC Machined Baseplates – Solid for maximum stiffness and durability.

Surge Pebax Pillow Line Straps – Pebax is a premium material most often found in high-end ski boots as it provides consistent stiffness and improved toughness in cold temperatures. It’s also 20% lighter than our standard material.

Premium Materials & Custom Hardware – Custom made hardware allows splitboard specific features to be added like hex heads for less strippage and hollow pivot pins for weight savings. The heel loop screws got the best makeover of all with a custom screw head with double the drive depth and an unthreaded shoulder to improve connection to the heel loop.

7075 Aluminum Heel Loops – Thinner and lighter than the standard heel loop while maintaining the required strength.

Surge Carbon Reinforced Nylon Highbacks – More responsive, lighter, and stiffer than our standard glass reinforced highbacks. Injection molding allows for more complex geometry and improved impact strength compared to other methods of carbon fiber construction

Requires Pucks for Mounting in Ride Mode – Spark Canted Pucks or Regular Pucks recommended (available to purchase separately)

Ibex Crampons sold separately

Weight – 1.34 lb/ea / 2.68 lb/pair (Size Medium)

Aluminum Discs with Nylon Bases

Discs – Aluminum

Nylon Bases

3˚ Canting (Inward Angle) – A favorite among hardbooters. Your knees will thank you.

Aluminum Discs – Oversize aluminum center disc overlaps binding channels for maximum strength and rigidity.

Adjustability – +/- quarter inch (6.5mm) of toe/heel adjustment allows for perfect centering. An industry first! +/- 30 degree angle adjustments; infinite stance width and setback adjustments.

Superior Materials – Bindings slide on soft nylon for effortless installation.

Weight – 319 grams

Compatible with All Spark R&D and Other Brands' Puck Compatible Splitboard Bindings (Except K2 Kwicker)

Not Compatible with Regular Spark Puck Screws

Not Compatible with DIY Splitboards, Unless the Voile Factory Hole Pattern Was Used

Not Compatible with Channel Style Boards from Voile, Burton, and K2

70% Mohair / 30% Nylon

Ever Dry 3.0 DWR – PFC-Free

Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.

Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.

Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.

Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.

Includes Pomoca Skin Trim Tool and Storage Bag

Trim to Fit Any Splitboard

This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.