Spark R&D Dyno DH Splitboard Bindings + Spark Pucks 2026
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Spark R&D Dyno DH Splitboard Bindings
OK, it's tough to admit this but some good ideas do come from the world of ski touring. Those who long to go deep into the backcountry know there's nothing like a tech hardboot setup to get the job done, and the Spark R&D Dyno DH Splitboard Bindings address this need for uphill speed. Designed to be used with a lightweight alpine touring ski boot and tech toepieces, this binding lives at the limit of light weight and lofty ambition and is beckoning to those pushing the envelope of splitboarding. Note: Pucks, tech toepieces, Dual Height Wires, and D Rex Crampons sold separately.
Product Details
Tour Mode
Tech Toes Required for Touring – Spark (or other brands) Tech Toes are required for uphill mode and available separately. Dyno DH bindings are for riding only. Carry them in your pack on the way up, while using your tech toes for touring. Then slide the Dynos on your pucks and lock into place with the snap ramps for the ride down.
Ride Mode
Puck Compatible (Sold Separately) – (Spark Canted Pucks recommended)
Baseplate
Stainless steel toe and heel bails
Toe clip is designed to fit even low profile (non-ISO 9523) AT boot soles.
Baseplate heel end is reinforced and extra sturdy to avoid bending from heavy use.
Features Tesla Snap Ramps for speedy, pinless transitions.
Compatibility
Requires Pucks for Mounting in Ride Mode – Spark Canted Pucks or Regular Pucks recommended (available to purchase separately)
Requires Tech Toepieces for Uphill Mode – Boots with Tech toe fittings required
Additional Features
Efficient design saves weight while maintaining backcountry dependability.
Specs
- Mounting Pucks: No
-
Made in the USA:
Yes
- Warranty: 5 Years
Spark R&D Spark Pucks
The new Spark R&D Spark Pucks give you almost unlimited stance options for splitboards with standard insert patterns. The oversized aluminum discs overlap the binding channels for enhanced rigidity and mount strength. Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models.
Product Details
Includes
4 discs and 4 baseplates
Mounting screws included
Materials
Aluminum / Nylon
Features
Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering
Plus or minus 30˚ angle adjustments
Infinite stance width and setback options
Compatibility
Compatible with all splitboards using the industry standard splitboard insert pattern. For use with all puck compatible splitboard bindings (with the exception of the K2 Kwicker)
Specs
- Mounting Pucks: Yes
-
Made in the USA:
Yes