Directional Camber/Rocker – A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

Flex Rating – 2/5 | Friendly and Playful

Forever Flex – All Jones boards are broken in using specialized machinery that mimics extreme riding use to help stabilize the flex and rocker profile of a board for it's lifetime.

Medium 3D Contour Base – 3D Contour Base tuned for all-terrain featuring 4mm spoon bevel in the nose and 0 to 4mm spoon bevel in the tail. Spoon bevel starts just before contact point.

Directional Shape

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3D Flip Tip – 3D Flip Tip maximizes float in deep powder, enhances glide and turn initiation, while reducing tip catch in rough terrain.

FSC Control Split Core – Dual-density full premium wood core designed specifically for splitboards. 2:1 paulownia to poplar stringer ratio keeps core light yet ultra damp.

Biax Fiberglass – A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Recycled ABS – ABS plastic is one of the necessary evils of snowboard production. Jones improves the sustainability of their snowboards by using only recycled plastic.

Sintered 8000 Base – New super durable material made from Ultra High Molecular Weight polyethylene and carbon.

Medium Traction Tech – Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Premium Eco Topsheet – Durable and scratch resistant bio-plastic topsheet made from castor beans that’s engineered to provide exceptional abrasion and impact resistance while minimizing environmental impact.

Bio Resin – All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Bolt-Less Bridge – The Bolt-Less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Factory Tuned – All Jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Karakoram Ultra Clips 1.0 – Karakoram Ultra Clips 1.0 remain some of the strongest and lowest profile clips in the industry. They are adjustable so you can maintain even compression as your splitboard ages.

Karakoram Tip Clips – Karakoram Tip clips made with durable ABS that swing closed and stay tight.

Wend Natural Wax – Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Standard Splitboard Insert Pattern

Improved ST (Smooth Touring) Mode – Spark injection molds a proprietary thermoplastic over existing aluminum or steel parts in a process called "overmolding," reducing friction and improving durabillity.

ST Whammy Bar Climbing Wire – Built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire deployment and transitions.

ST Touring Brackets – Incorporates the best features of aluminum and thermoplastics. Spark R&D overmolds their custom plastic blend over and through the holes in the aluminum base, forming bushings that are incredibly durable.

ST Whammy Bars – A single fatty wire with a side arm lever. Overmolded thermoplastic sections allow you to switch easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Includes an overmolded sleeve of plastic on both sides of the bar, right where the climbing wire contacts the baseplate. This reduces friction allowing for super smooth movement into and out of high, low, and stowed positions.

T1 Heel Rest – Catches the climbing wire in the 12° and 18° positions.

Snap Ramps – Bindings slide sideways into offset touring brackets and are locked into place with our snap ramps.

CNC Machined Baseplates – Solid for maximum stiffness and durability.

Pillow Line Straps – Lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Surge ST ankle straps are wide and asymmetrical around the boot for incredible all-around support.

Ladders & Straps – Produced with unique thermoplastics that maintain flex over a wide temperature range

Bomber Buckles – These incorporate Burton's time-tested bomber buckles.

Surge ST Asym Rip "N" Flip Highbacks – These have a high amount of glass fiber fill for a stiff ride and maximum response. They feature individual left and right highbacks for natural ergonomics with a flattened top section giving riders great lateral mobility.

Requires Pucks for Mounting in Ride Mode – Spark Canted Pucks or Regular Pucks recommended (available to purchase separately)

Ibex Crampons sold separately

Weight – 1.52 lb/ea / 3.04 lb/pair (Size Medium)

4 discs and 4 baseplates

Mounting screws included

Aluminum / Nylon

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Compatible with all splitboards using the industry standard splitboard insert pattern. For use with all puck compatible splitboard bindings (with the exception of the K2 Kwicker)

70% Mohair / 30% Nylon

Ever Dry 3.0 DWR – PFC-Free

Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.

Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.

Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.

Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.

Includes Pomoca Skin Trim Tool and Storage Bag

Trim to Fit Any Splitboard

This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.