But fear not - there is plenty to explore...
Shop all Salomon Shop sale SalomonMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
The Salomon HPS - Louif Paradis Snowboard features a distinctive blunt nose and tail in a charger powder design with 20mm of setback and a deep tip rocker for float. If you think this Hillside Project newcomer is just for deep powder though, think again. The HPS - Louif Paradis uses Rock Out Camber in a narrower tapered design that sets it up well as an all-round freeride board, too.
Rock Out Camber – Flat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.
Flex Rating – 4 (1 Soft - 5 Stiff)
Quadralizer Sidecut – Explosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.
Ghost Green Core – Ghost Green Core components have been selected and designed to optimize pop and reduce weight while utilizing sustainable attributes of a super light paulownia wood.
Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.
ABC Wrapper – ABC Wrapper is a patented process using structural bamboo veneers to reduce fiberglass and resin content in each board by 40%.
Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.
Bamboo / Cork Rails – The liveliness of eco-friendly bamboo, mixed with cork composite for the best direct feel and dampening ride in the industry.
Sintered EG – Engineered for a super fast glide in everything from fresh pow to sticky spring snow. Sintered material provides superior wax retention, Gallium strengthens impact resistance, and the Electra finish gives a turbocharged glide.
Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.
All-Mountain Edge Bevels – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.
2 x 4 Insert Pattern
Size (cm) | 155 | 159 | 163 |
---|---|---|---|
Effective Edge (mm) | 1180 | 1210 | 1230 |
Tip Width (mm) | 302 | 307 | 311 |
Waist Width (mm) | 255 | 258 | 262 |
Tail Width (mm) | 297 | 302 | 306 |